And:
format
Searching for disks...done
c22t2d0: configured with capacity of 1.77GB
AVAILABLE DISK SELECTIONS:
0. c4t5000C5003AC39D5Fd0 <SEAGATE-ST3600057SS-ES64-558.91GB>
/scsi_vhci/disk@g5000c5003ac39d5f
1. c4t5000C50039F0B447d0 <SEAGATE-ST3600057SS-ES64-558.91GB>
/scsi_vhci/disk@g5000c50039f0b447
2. c4t5000C5000970B70Bd0 <SEAGATE-ST3600057SS-ES62-558.91GB>
/scsi_vhci/disk@g5000c5000970b70b
3. c4t5000C5000972C693d0 <SEAGATE-ST3600057SS-ES62-558.91GB>
/scsi_vhci/disk@g5000c5000972c693
4. c4t5000C500097009DBd0 <SEAGATE-ST3600057SS-ES62-558.91GB>
/scsi_vhci/disk@g5000c500097009db
5. c4t5000C500097040BFd0 <SEAGATE-ST3600057SS-ES62-558.91GB>
/scsi_vhci/disk@g5000c500097040bf
6. c4t5000C5000970727Fd0 <SEAGATE-ST3600057SS-ES62-558.91GB>
/scsi_vhci/disk@g5000c5000970727f
7. c4t5000C50009724377d0 <SEAGATE-ST3600057SS-ES62-558.91GB>
/scsi_vhci/disk@g5000c50009724377
8. c4t5000C50009707487d0 <SEAGATE-ST3600057SS-ES62-558.91GB>
/scsi_vhci/disk@g5000c50009707487
9. c4t50015179591C238Fd0 <ATA-INTEL SSDSA2M160-02HA-149.05GB>
/scsi_vhci/disk@g50015179591c238f
10. c4t500151795910D221d0 <DEFAULT cyl 24915 alt 2 hd 224 sec 56>
/scsi_vhci/disk@g500151795910d221
11. c22t2d0 <ATA-ANS9010_2NNN2NNN-_200 cyl 908 alt 2 hd 128 sec 32>
/pci@0,0/pci15d9,400@1f,2/disk@2,0
12. c22t3d0 <ATA-ANS9010_2NNN2NNN-_200-1.78GB>
/pci@0,0/pci15d9,400@1f,2/disk@3,0
13. c22t4d0 <ATA-ANS9010_2NNN2NNN-_200-1.78GB>
/pci@0,0/pci15d9,400@1f,2/disk@4,0
14. c22t5d0 <ATA-ANS9010_2NNN2NNN-_200-1.78GB>
/pci@0,0/pci15d9,400@1f,2/disk@5,0
> -----Original Message-----
> From: Fred Liu
> Sent: 星期一, 九月 19, 2011 23:35
> To: Fred Liu; Richard Elling
> Cc: zfs-discuss@opensolaris.org
> Subject: RE: [zfs-discuss] remove wrongly added device from zpool
>
> I get some good progress like following:
>
> zpool import
> pool: cn03
> id: 1907858070511204110
> state: UNAVAIL
> status: One or more devices are missing from the system.
> action: The pool cannot be imported. Attach the missing
> devices and try again.
> see: http://www.sun.com/msg/ZFS-8000-6X
> config:
>
> cn03 UNAVAIL missing device
> raidz2-0 ONLINE
> c4t5000C5000970B70Bd0 ONLINE
> c4t5000C5000972C693d0 ONLINE
> c4t5000C500097009DBd0 ONLINE
> c4t5000C500097040BFd0 ONLINE
> c4t5000C5000970727Fd0 ONLINE
> c4t5000C50009707487d0 ONLINE
> c4t5000C50009724377d0 ONLINE
> c4t5000C50039F0B447d0 ONLINE
> c22t3d0 ONLINE
> c4t50015179591C238Fd0 ONLINE
> logs
> c22t4d0 ONLINE
> c22t5d0 ONLINE
>
> Additional devices are known to be part of this pool, though
> their
> exact configuration cannot be determined.
>
> Any suggestions?
>
> Thanks.
>
> Fred
>
> > -----Original Message-----
> > From: Fred Liu
> > Sent: 星期一, 九月 19, 2011 22:28
> > To: 'Richard Elling'
> > Cc: zfs-discuss@opensolaris.org
> > Subject: RE: [zfs-discuss] remove wrongly added device from zpool
> >
> >
> > >
> > > You don't mention which OS you are using, but for the past 5 years
> of
> > > [Open]Solaris
> > > releases, the system prints a warning message and will not allow
> this
> > > to occur
> > > without using the force option (-f).
> > > -- richard
> > >
> > Yes. There is a warning message, I used zpool add -f.
> >
> > Thanks.
> >
> > Fred
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
