|
Help - I've got a bad disk in a zpool and need to replace it. I've
got
an extra drive that's not being used, although it's still marked
like
it's in a pool. So I need to get the "xvm" pool destroyed, c0t5d0
marked as available, and replace c0t3d0 with c0t5d0. root@kc-x4450a # zpool status -xv pool: vms state: UNAVAIL status: One or more devices are faulted in response to IO failures. action: Make sure the affected devices are connected, then run 'zpool clear'. see: http://www.sun.com/msg/ZFS-8000-HC scrub: none requested config: NAME STATE READ WRITE CKSUM vms UNAVAIL 0 3 0 insufficient replicas c0t2d0 ONLINE 0 0 0 c0t3d0 UNAVAIL 0 6 0 experienced I/O failures c0t4d0 ONLINE 0 0 0 errors: Permanent errors have been detected in the following files: vms:<0x5> vms:<0xb> root@kc-x4450a # zpool replace -f vms c0t3d0 c0t5d0 cannot replace c0t3d0 with c0t5d0: pool I/O is currently suspended root@kc-x4450a # zpool import pool: xvm id: 14176680653869308477 state: DEGRADED status: The pool was last accessed by another system. action: The pool can be imported despite missing or damaged devices. The fault tolerance of the pool may be compromised if imported. see: http://www.sun.com/msg/ZFS-8000-EY config: xvm DEGRADED mirror-0 DEGRADED c0t4d0 FAULTED corrupted data c0t5d0 ONLINE Thanks! -Doug |
_______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
