On 05 April, 2011 - Joe Auty sent me these 5,9K bytes: > Hello, > > A while I was exploring running smartmontools in Solaris 10 on my SATA > drives, but at the time SATA drives were not supported. > > Has this changed, or are there any other techniques I can use to check > the health of an individual SATA drive in my pool short of what ZFS > itself reports?
Through scsi compat layer.. socker:~# smartctl -a -d scsi /dev/rdsk/c0t0d0s0 smartctl 5.40 2010-10-16 r3189 [i386-pc-solaris2.10] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Serial number: WCAT26836798 Device type: disk Local Time is: Tue Apr 5 22:00:23 2011 MEST Device supports SMART and is Enabled Temperature Warning Disabled or Not Supported SMART Health Status: OK Current Drive Temperature: 29 C Error Counter logging not supported SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Default Completed - 293 - [- - -] ... /Tomas -- Tomas Ögren, st...@acc.umu.se, http://www.acc.umu.se/~stric/ |- Student at Computing Science, University of Umeå `- Sysadmin at {cs,acc}.umu.se _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
