Hello Richard Elling and List, thx for your answer.
I have this problems when I want to install and use Nexenta 3.0.4. I have wrote that I have bought the Supermicro Board and when all items are here I want to make a new installation. I can not send now zpool status -xv. Maybe you have right that the BIOS is crappy. Before I install the HBA at supermicro board I will make a reset with the HBA. on Dezember, 19 2010, 19:55 <Richard Elling> wrote in [1]: > On Dec 16, 2010, at 12:08 PM, Alexander Lesle wrote: >> Hello Pasi, >> >> thx for the quick answer. >> >> Its sounds fine because with the Asus Board and at Nexenta always I >> get a message that my rpool is degraded when I set AHCI. > That is very unusual. Please send the output of "zpool status -xv" >> Additionally with the LSI HBA the board doesnt boot by set AHCI. > This sounds like a crappy BIOS or HBA firmware. Also, it could be > some combination of BIOS settings that confuse the issue. > -- richard >> >> am Donnerstag, 16. Dezember 2010 um 20:53 hat <Pasi Kärkkäinen> u.a. >> in mid:20101216195305.gz2...@reaktio.net geschrieben: >>> On Thu, Dec 16, 2010 at 08:43:02PM +0100, Alexander Lesle wrote: >>>> Hello All, >>>> >>>> I want to build a home file and media server now. After experiment with a >>>> Asus Board and running in unsolve problems I have bought this >>>> Supermicro Board X8SIA-F with Intel i3-560 and 8 GB Ram >>>> http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIA.cfm?IPMI=Y >>>> also the LSI HBA SAS 9211-8i >>>> http://lsi.com/storage_home/products_home/host_bus_adapters/sas_hbas/internal/sas9211-8i/index.html >>>> >>>> rpool = 2vdev mirror >>>> tank = 2 x 2vdev mirror. For the future I want to have the option to >>>> expand up to 12 x 2vdev mirror. >>>> >>>> After reading the board manual I found at page 4-9 where I can set >>>> SATA#1 from IDE to AHCI. >>>> >>>> Can zfs handle AHCI for rpool? >>>> Can zfs handle AHCI for tank? >>>> >>>> Thx for helping. >>>> >> >>> You definitely want to use AHCI and not the legacy IDE. >> >>> AHCI enables: >>> - disk hotswap. >>> - NCQ (Native Command Queuing) to execute multiple commands at the >>> same time. >> >> >>> -- Pasi >> >> >> -- >> Schoenen Abend wuenscht >> Alexander >> mailto:gro...@tierarzt-mueller.de >> eMail geschrieben mit: The Bat! 4.0.38 >> unter Windows Pro >> >> >> >> >> >> _______________________________________________ >> zfs-discuss mailing list >> zfs-discuss@opensolaris.org >> http://mail.opensolaris.org/mailman/listinfo/zfs-discuss -- Best Regards Alexander Dezember, 20 2010 ........ [1] mid:39b246ac-a158-4aed-a161-7bfa26858...@gmail.com ........ _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
