Hi all,
I have issued a scrub on a pool, that consists of two independant FC raids. The
scrub has been running for approx. 25 hrs and then showed 100%, but there's
still an incredible traffic on one of the FC raids going on, plus zpool statuv
-v reports that scrub is still running:
zpool status -v backupPool_01
pool: backupPool_01
state: ONLINE
status: One or more devices has experienced an unrecoverable error. An
attempt was made to correct the error. Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
using 'zpool clear' or replace the device with 'zpool replace'.
see: http://www.sun.com/msg/ZFS-8000-9P
scrub: scrub in progress for 26h45m, 100,00% done, 0h0m to go
config:
NAME STATE READ WRITE CKSUM
backupPool_01 ONLINE 0 0 0
c3t2100001378AC0271d0 ONLINE 0 0 26 2,11M repaired
c3t2100001378AC026Ed0 ONLINE 0 0 0
errors: No known data errors
So, what is scrub still doing to the upper vdev? Is there anywhere where I can
get more information about what scrub is still doing?
Thanks,
budy
--
This message posted from opensolaris.org
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
