> On Sat, Aug 28, 2010 at 02:54, Darin Perusich > <darin.perus...@cognigencorp.com> wrote: > > Hello All, > > > > I'm sure this has been discussed previously but I haven't been able to > find an > > answer to this. I've added another raidz1 vdev to an existing storage > pool and > > the increased available storage isn't reflected in the 'zfs list' output. > Why > > is this? > > > > The system in question is runnning Solaris 10 5/09 s10s_u7wos_08, kernel > > Generic_139555-08. The system does not have the lastest patches which > might be > > the cure. > > > > Thanks! > > > > Here's what I'm seeing. > > zpool create datapool raidz1 c1t50060E800042AA70d0 c1t50060E800042AA70d1 > > > > zpool status > > pool: datapool > > state: ONLINE > > scrub: none requested > > config: > > > > NAME STATE READ WRITE CKSUM > > datapool ONLINE 0 0 0 > > raidz1 ONLINE 0 0 0 > > c1t50060E800042AA70d0 ONLINE 0 0 0 > > c1t50060E800042AA70d1 ONLINE 0 0 0 > > > > zfs list > > NAME USED AVAIL REFER MOUNTPOINT > > datapool 108K 196G 18K /datapool > > > > zpool add datapool raidz1 c1t50060E800042AA70d2 c1t50060E800042AA70d3 > > > > zpool status > > pool: datapool > > state: ONLINE > > scrub: none requested > > config: > > > > NAME STATE READ WRITE CKSUM > > datapool ONLINE 0 0 0 > > raidz1 ONLINE 0 0 0 > > c1t50060E800042AA70d0 ONLINE 0 0 0 > > c1t50060E800042AA70d1 ONLINE 0 0 0 > > raidz1 ONLINE 0 0 0 > > c1t50060E800042AA70d2 ONLINE 0 0 0 > > c1t50060E800042AA70d3 ONLINE 0 0 0 > > > > zfs list > > NAME USED AVAIL REFER MOUNTPOINT > > datapool 112K 392G 18K /datapool >
Darin, you created 'pool'-vdev from the two 'raid-z'-vdev: result you have size_of_pool = 2 * 'raid-z' > _______________________________________________ > zfs-discuss mailing list > zfs-discuss@opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/zfs-discuss >
_______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
