Ouch...!
Thanks for the head's up, and is there any workaround for this?
Can i for instance :
1. Create the iscsi block on the primary server with command : zfs
create -p -s -V 10G vol0/iscsi/LUN_10GB
2. Use sbdadm to make the lun available with command : sbdadm
create-lu /dev/zvol/rdsk/vol0/iscsi/LUN_10GB
3. Add a view to this LUN with the command : stmfadm add-view uuid_of_LUN
4. use zfs send/receive to replicate this LUN from the primary server
to the backup server
5. on the backserver use sbdadm create-lu or import-lu
/dev/zvol/rdsk/vol0/iscsi/LUN_10GB
Thanks for all the tips.
Bruno
On 29-6-2010 14:10, Preston Connors wrote:
> On Tue, 2010-06-29 at 08:58 +0200, Bruno Sousa wrote:
>
>> Hmm...that easy? ;)
>>
>> Thanks for the tip, i will see if that works out.
>>
>> Bruno
>>
> Be aware of the Important Note in
> http://wikis.sun.com/display/OpenSolarisInfo/Backing+Up+and+Restoring+a
> +COMSTAR+Configuration regarding Backing Up and Restoring a COMSTAR
> Configuration.
>
> Important Note
> An existing bug in svccfg export causes data to be lost on export when
> the persistent logical unit data (stored in the provider_data_pg_sbd
> property group) exceeds 2 Kbytes. Refer to CR 6694511 for more details.
> Because the truncation is silent, you cannot determine when data has
> been lost on export. Until CR 6694511 is integrated, do not use the
> instructions on this page to back up the STMF service.
>
>
>> On 29-6-2010 2:29, Mike Devlin wrote:
>>
>>> I havnt tried it yet, but supposedly this will backup/restore the
>>> comstar config:
>>>
>>> $ svccfg export -a stmf > comstar.bak.${DATE}
>>>
>>> If you ever need to restore the configuration, you can attach the
>>> storage and run an import:
>>>
>>> $ svccfg import comstar.bak.${DATE}
>>>
>>>
>>> - Mike
>>>
>>> On 6/28/10, [email protected] <[email protected]> wrote:
>>>
>>>
>>>> Hi all,
>>>>
>>>> Having osol b134 exporting a couple of iscsi targets to some hosts,how can
>>>> the COMSTAR configuration be migrated to other host?
>>>> I can use the ZFS send/receive to replicate the luns but how can I
>>>> "replicate" the target,views from serverA to serverB ?
>>>>
>>>> Is there any best procedures to follow to accomplish this?
>>>> Thanks for all your time,
>>>>
>>>> Bruno
>>>>
>>>> Sent from my HTC
>>>> --
>>>> This message has been scanned for viruses and
>>>> dangerous content by MailScanner, and is
>>>> believed to be clean.
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_______________________________________________
zfs-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
