All, I did some digging and I was under the impression that the mr_sas driver was to support the LSISAS2004 HBA controller from LSI. I did add the pci id to the driver alias for mr_sas, but then the driver still showed up as unattached (see below). Did I miss something, or was my assumption that this controller was supported in the dev branch flawed. I'm running: SunOS 5.11 snv_134 i86pc i386 i86pc Solaris.
Thanks in advance for any pointers. node name: pci1000,3010 Vendor: LSI Logic / Symbios Logic Device: SAS2004 PCI-Express Fusion-MPT SAS-2 [Spitfire] Sub-Vendor: LSI Logic / Symbios Logic binding name: pciex1000,70 devfs path: /p...@0,0/pci8086,3...@3/pci1000,3010 pci path: 3,0,0 compatible name: (pciex1000,70.1000.3010.2)(pciex1000,70.1000.3010)(pciex1000,70.2)(pciex1000,70)(pciexclass,010700)(pciexclass,0107)(pci1000,70.1000.3010.2)(pci1000,70.1000.3010)(pci1000,3010)(pci1000,70.2)(pci1000,70)(pciclass,010700)(pciclass,0107) driver name: mr_sas driver state: Detached assigned-addresses: 81030010 reg: 30000 compatible: pciex1000,70.1000.3010.2 model: Serial Attached SCSI Controller power-consumption: 1 devsel-speed: 0 interrupts: 1 subsystem-vendor-id: 1000 subsystem-id: 3010 unit-address: 0 class-code: 10700 revision-id: 2 vendor-id: 1000 device-id: 70 _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
