At Wed, 10 Mar 2010 15:28:40 -0800 Cindy Swearingen wrote:
> Hey list,
>
> Grant says his system is hanging after the zpool replace on a v240,
running Solaris 10 5/09, 4 GB of memory, and no ongoing snapshots.
> No errors from zpool replace so it sounds like the disk was
physically
> replaced successfully.
>
> If anyone else can comment or help Grant diagnose this issue, please
> feel free...
>
> Thanks,
>
> Cindy
I'm had a similar problem -- swapped out the drive and now when I
tried the zfs replace, I got an I/O error:
k01_dlk$ sudo zpool replace rpool c1t0d0s0
cannot open '/dev/dsk/c1t0d0s0': I/O error
I ran format and made sure the partition table matched the good root
mirror, then was able to rerun the zpool replace:
k01_dlk$ sudo zpool replace -f rpool c1t0d0s0 c1t0d0s0
Please be sure to invoke installgrub(1M) to make 'c1t0d0s0' bootable.
Can I assume zfs_stage1_5 is correct?
k01_dlk$ cd /boot/grub/
k01_dlk$ ls
bin fat_stage1_5 jfs_stage1_5 nbgrub
stage1 ufs_stage1_5
capability ffs_stage1_5 menu.lst pxegrub
stage2 vstafs_stage1_5
default install_menu menu.lst.orig reiserfs_stage1_5
stage2_eltorito xfs_stage1_5
e2fs_stage1_5 iso9660_stage1_5 minix_stage1_5 splash.xpm.gz
ufs2_stage1_5 zfs_stage1_5
Installgrub succeeded, but I'm a tad nervous about rebooting until I
know for sure.
k01_dlk$ sudo installgrub zfs_stage1_5 stage2 /dev/rdsk/c1t0d0s0
stage1 written to partition 0 sector 0 (abs 16065)
stage2 written to partition 0, 272 sectors starting at 50 (abs 16115)
Thanks,
--Dave
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
