> On Sun, Mar 7, 2010 at 12:30 PM, Ethan <notet...@gmail.com> wrote: > >> I have a failing drive, and no way to correlate the device with errors >> in >> the zpool status with an actual physical drive. >> If I could get the device's serial number, I could use that as it's >> printed >> on the drive. >> I come from linux, so I tried dmesg, as that's what's familiar (I see >> that >> the man page for dmesg on opensolaris says that I should be using >> syslogd >> but I haven't been able to figure out how to get the same output from >> syslogd). But, while I see at the top the serial numbers for some other >> drives, I don't see the one I want because it seems to be scrolled off >> the >> top. >> Can anyone tell me how to get the serial number of my failing drive? Or >> some other way to correlate the device with the physical drive? >> >> -Ethan >> >> >> > smartctl will do what you're looking for. I'm not sure if it's included > by > default or not with the latest builds. Here's the package if you need to > build from source: > http://smartmontools.sourceforge.net/ >
You can find it at http://blastwave.network.com/csw/unstable/ Just install it with pkgadd or use pkgtrans to extract it and then run the binary. -- Dennis Clarke dcla...@opensolaris.ca <- Email related to the open source Solaris dcla...@blastwave.org <- Email related to open source for Solaris _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
