Thanks for the info.

I will take the Napp-it question off line with Günther and see if i can fix that.

Intel Nic sounds like a plan... was thinking of sticking 2 in anyway... just looking at the cards though, they are GigaNIX 2032T and searching for this online results nothing when i include Solaris or OpenSolaris... Pity...

finally, i will use the 750 somewhere else, and use 3 500s i have here... should be enough to start with...

Tiernan OToole
Software Developer
Chat Google Talk: lsmart...@gmail.com Skype: tiernanotoole MSN: lotas...@hotmail.com
Contact Me LinkedinFacebookFlickrTwitterLast.fm
Tiernans Comms Closet New Year, New Upgrades…

On 31/01/2010 18:43, Günther wrote:
hello

napp-it is just a simple cgi-script

common 3 reasons for error 500:
- file permission: just set all files in /napp-it/.. to 777 recursively
  (rwx for all - napp-it will set them correct at first call)

-files must be copied in ascii-mode
  have you used winscp? ; otherwise you must care about

-cgi-bin folder must be allowed to hold executabels
  is set in apache config file in /etc/apache2/sites/enabled/000-default
  should be ok per default

- missing modules (not a problem in nexenta)

please look at apache error log-file at
/var/log/apache2/error.log

there you will find the reason for this error

your nics:
i suppose, your other nics are not supported by default
you can try to find and install drivers or (better):
forget them and buy a intel nic -(about 50 euro, no problem)

your hd:
if you build a raid 1 or raid-z, the capacity depends on
the smallest drive, so your 750 hd is used as 500 gig-

gea
  

_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss

Reply via email to