We had a similar problem on Areca 1680. It was caused by a drive that
didn't properly reset (took ~2 seconds each time according to the drive
tray's led).
Replacing the drive solved this problem, but then we hit another problem
which you can see in this thread :
http://opensolaris.org/jive/thread.jspa?threadID=121335&tstart=0
I'm curious wether you have a similar setup and encounter the same problems.
How did you setup your pools ?
Please tell me if you have any luck setting the drives to pass-through.
Thanks,
Arnaud
Le 09/01/10 14:26, Rob a écrit :
I have installed Opensolaris build 129 on our server. It has 12 disk at a Areca
1130 controller. Using the latest firmware.
I have put all the disk in jbod and running them in raidz2. After a while the
systems hangs with arcmsr0: tran reset )level 0x1) called for target4 lun 0
target reset not supported
What can I do? I really want it to work!
(I am gone set all the disk to pass-through monday)
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
