Hi!
I tried to add an other FiweFire Drive to my existing four devices but it
turned out, that the OpenSolaris IEEE1394 support doen't seem to be
well-engineered.
After not recognizing the new device and exporting and importing the existing
zpool, I get this zpool status:
pool: tank
state: DEGRADED
status: One or more devices could not be used because the label is missing or
invalid. Sufficient replicas exist for the pool to continue
functioning in a degraded state.
action: Replace the device using 'zpool replace'.
see: http://www.sun.com/msg/ZFS-8000-4J
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
tank DEGRADED 0 0 0
raidz1 DEGRADED 0 0 0
c12t0d0 ONLINE 0 0 0
c12t0d0 FAULTED 0 0 0 corrupted data
c14t0d0 ONLINE 0 0 0
c15t0d0 ONLINE 0 0 0
The device c12t0d0 appears two times!?
'format' returns these devices:
AVAILABLE DISK SELECTIONS:
0. c7d0 <DEFAULT cyl 19454 alt 2 hd 255 sec 63>
/p...@0,0/pci-...@b/i...@0/c...@0,0
1. c12t0d0 <Ext Hard- Disk--931.51GB>
/p...@0,0/pci10de,a...@16/pci11c1,5...@0/u...@00303c02e014fc66/d...@0,0
2. c13t0d0 <Ext Hard- Disk--931.51GB>
/p...@0,0/pci10de,a...@16/pci11c1,5...@0/u...@00303c02e014fc32/d...@0,0
3. c14t0d0 <Ext Hard- Disk--931.51GB>
/p...@0,0/pci10de,a...@16/pci11c1,5...@0/u...@00303c02e014fc61/d...@0,0
4. c15t0d0 <Ext Hard- Disk--931.51GB>
/p...@0,0/pci10de,a...@16/pci11c1,5...@0/u...@00303c02e014fc9d/d...@0,0
When I scrub data, the devices c12t0d0, c13t0d0 and c14t0d0 re accessed and
c15t0d0 sleeps. I don't get it! How can such a mess happen and how do I get it
back straight?
Regards,
Martin
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
