After several days of trying to get a 1.5TB drive to resilver and it
continually restarting, I eliminated all of the snapshot-taking
facilities which were enabled and
2009-10-29.14:58:41 [internal pool scrub done txg:567780] complete=0
2009-10-29.14:58:41 [internal pool scrub txg:567780] func=1 mintxg=3
maxtxg=567354
2009-10-29.16:52:53 [internal pool scrub done txg:567999] complete=0
2009-10-29.16:52:53 [internal pool scrub txg:567999] func=1 mintxg=3
maxtxg=567354
2009-10-29.16:54:09 [internal pool scrub done txg:568003] complete=0
2009-10-29.16:54:09 [internal pool scrub txg:568003] func=1 mintxg=3
maxtxg=567354
2009-10-29.16:55:24 [internal pool scrub done txg:568007] complete=0
2009-10-29.16:55:24 [internal pool scrub txg:568007] func=1 mintxg=3
maxtxg=567354
It currently has one drive which is brand new and was just replaced,
and quite likely another one on the way out:
r...@raid3136:~# zpool status raid3149
pool: raid3149
state: ONLINE
status: One or more devices has experienced an unrecoverable error. An
attempt was made to correct the error. Applications are
unaffected.
action: Determine if the device needs to be replaced, and clear the
errors
using 'zpool clear' or replace the device with 'zpool replace'.
see: http://www.sun.com/msg/ZFS-8000-9P
scrub: resilver in progress for 0h10m, 0.05% done, 344h18m to go
config:
NAME STATE READ WRITE CKSUM
raid3149 ONLINE 0 0 0
raidz2 ONLINE 0 0 0
c6t9d0 ONLINE 0 0 0
c6t10d0 ONLINE 0 0 0
c6t11d0 ONLINE 0 0 0
c6t12d0 ONLINE 0 0 0
c6t13d0 ONLINE 0 0 0
c6t14d0 ONLINE 0 0 0
c6t15d0 ONLINE 0 0 0
c6t16d0 ONLINE 0 0 0
c6t17d0 ONLINE 0 0 0
c6t18d0 ONLINE 0 0 0
c6t19d0 ONLINE 0 0 0
c6t20d0 ONLINE 0 0 0
c6t21d0 ONLINE 0 0 0
c6t22d0 ONLINE 0 0 0 592M resilvered
c6t23d0 ONLINE 0 0 0
c6t24d0 ONLINE 0 0 0
c6t46d0 ONLINE 0 0 0
c6t47d0 ONLINE 0 0 0
c6t25d0 ONLINE 0 0 0
c6t26d0 ONLINE 0 0 0
c6t48d0 ONLINE 0 0 0
c6t49d0 ONLINE 0 0 0
c6t50d0 ONLINE 131 0 0 1.22M resilvered
c6t51d0 ONLINE 0 0 0
errors: No known data errors
c6t22d0 is the brand new drive and c6t50d0 is the one I think is on
its way out.
is there any way to disable this internal scrub temporarily so it can
finish resilvering the pool and I can get that other drive replaced?
I really don't want to have to replace both drives at the same time
since that leaves me with no redundancy in the pool.
-Jeremy
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
