I have a pool, "huge", composed of one six-disk raidz2 vdev and a log
device. I failed to plug in one disk when I took the machine down to
plug in the log device, and booted all the way before I realized this,
so the raidz2 vdev was rightly listed as degraded. Then I brought the
machine down, plugged the disk in, and brought it back up. I ran
"zpool scrub huge" to make sure that the missing disk was completely
synced. After a few minutes, "zpool status huge" showed this:
$ zpool status huge
pool: huge
state: ONLINE
status: One or more devices has experienced an unrecoverable error. An
attempt was made to correct the error. Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
using 'zpool clear' or replace the device with 'zpool replace'.
see: http://www.sun.com/msg/ZFS-8000-9P
scrub: scrub in progress for 0h8m, 1.19% done, 11h15m to go
config:
NAME STATE READ WRITE CKSUM
huge DEGRADED 0 0 0
raidz2 DEGRADED 0 0 0
c4t4d0 DEGRADED 0 0 15 too many errors
c4t1d0 ONLINE 0 0 0
c4t2d0 ONLINE 0 0 0
c4t3d0 ONLINE 0 0 0
c4t5d0 ONLINE 0 0 0
c4t6d0 ONLINE 0 0 0
logs DEGRADED 0 0 0
c7d1 ONLINE 0 0 0
errors: No known data errors
I understand that not all of the blocks may have been synced onto
c4t4d0 (the missing disk), so some checksum errors are normal there.
But the log disk reports no errors, and its sole component reports
none either, yet the log device is marked as degraded. To see what
would happen, I executed this:
$ pfexec zpool clear huge c4t4d0
$ zpool status huge
pool: huge
state: ONLINE
status: One or more devices has experienced an unrecoverable error. An
attempt was made to correct the error. Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
using 'zpool clear' or replace the device with 'zpool replace'.
see: http://www.sun.com/msg/ZFS-8000-9P
scrub: scrub in progress for 0h12m, 1.87% done, 10h32m to go
config:
NAME STATE READ WRITE CKSUM
huge ONLINE 0 0 0
raidz2 ONLINE 0 0 0
c4t4d0 ONLINE 0 0 2
c4t1d0 ONLINE 0 0 0
c4t2d0 ONLINE 0 0 0
c4t3d0 ONLINE 0 0 0
c4t5d0 ONLINE 0 0 0
c4t6d0 ONLINE 0 0 0
logs ONLINE 0 0 0
c7d1 ONLINE 0 0 0
errors: No known data errors
So clearing the errors from one device has an effect on the status of
another device? Is this expected behavior, or is something wrong with
my log device? I'm running snv_111.
Will
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
