casper....@sun.com writes: >>I mentioned that pressing F3 doesn't do anything. That is, I have >>now way to enter the configuration tool. > > > Does it work when you first remove the 200GB drive, reboot, press F3 > and see what you can do in that configuration tool. > > It is possible that it first needs to forget the 200GB drive.
OK, booted with no sata drives attached. At the press F3 screen, again pressing F3 appears to have no effect. But after a moment two messages saying `no drives found' print out, and then boot proceeds. Once booted up I see the recurring message where I should see a login prompt (I'm setup to boot into console mode). ata_id_common Busy Status 0xfe error 0x0 Repeated 4 times, then after maybe a 2-3 minute wait the regular login prompt appears. There is something more going on that is dragging the machine down so that typing at the prompt is delayed by huge pauses. I'm not really able to find out what it is yet but will post back later after a reboot. _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
