> Anyway, you could try simply creating standard
> FDISK/Solaris/vtoc
> partitioning on the SD card, with all the free space
> contained in one
> slice, and give that slice to ZFS.
This is what I've done so far.
fdisk -
Total disk size is 1943 cylinders
Cylinder size is 4096 (512 byte) blocks
Cylinders
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
1 Solaris2 1 1942 1942 100
partition> p
Volume: cache
Current partition table (original):
Total disk cylinders available: 1940 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 unassigned wm 0 0 (0/0/0) 0
1 unassigned wm 0 0 (0/0/0) 0
2 unassigned wu 1 - 1939 3.79GB (1939/0/0) 7942144
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
8 boot wu 0 - 0 2.00MB (1/0/0) 4096
9 unassigned wm 0 0 (0/0/0) 0
partition>
I then tried numerous variations of the command and kept getting errors like
this one:
$ pfexec zpool add rpool cache /dev/dsk/c8t0d0s2
cannot add to 'rpool': invalid argument for this pool operation
$
Eventually I tried this one:
$ pfexec zpool add rpool cache /dev/rdsk/c8t0d0
I think its working but aren't sure because it still hasn't finished after
1hr15. The HD seems to be getting hit fairly hard and iostat shows:
zpool iostat -v rpool
capacity operations bandwidth
pool used avail read write read write
---------- ----- ----- ----- ----- ----- -----
rpool 49.1G 14.4G 11 56 747K 3.88M
c4t0d0s0 49.1G 14.4G 11 56 747K 3.88M
---------- ----- ----- ----- ----- ----- -----
I'll let it run through the night and see what happens.
Cheers, JP
--
This message posted from opensolaris.org
_______________________________________________
zfs-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
