Frank Cusack wrote: > On January 30, 2009 9:52:59 AM -0800 Frank Cusack <fcus...@fcusack.com> > wrote: > >> pool: data2 >> state: UNAVAIL >> status: One or more devices could not be opened. There are insufficient >> replicas for the pool to continue functioning. >> action: Attach the missing device and online it using 'zpool online'. >> see: http://www.sun.com/msg/ZFS-8000-3C >> scrub: none requested >> config: >> >> NAME STATE READ WRITE CKSUM >> data2 UNAVAIL 0 0 0 insufficient replicas >> c3t0d0 UNAVAIL 0 0 0 cannot open >> >> i've tried various things but am unable to get this pool to import. there >> ARE no other disks in the pool, so not sure how there can be "insufficient >> replicas". it was working just fine as a 1-disk zpool before the reboot. >> in fact, there is another 1-disk zpool active right now. >> > > i was able to import it by doing an export first (even though it wasn't > currently imported?). which is fine, but the status/error message is > quite poor in this case. >
There is a whole set of issues like this when the zpool.cache is not in agreement with the physical reality. Most of them are cosmetic, which is why (IMHO) it has not been a high priority. I meant to track a bunch of these down and add them to the ZFS Troubleshooting Guide. -- richard _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
