Umm, why do you need to do it the complicated way ? Here it is from zpool man
page-
zpool replace [-f] pool old_device [new_device]
Replaces old_device with new_device. This is equivalent
to attaching new_device, waiting for it to resilver, and
then detaching old_device.
The size of new_device must be greater than or equal to
the minimum size of all the devices in a mirror or raidz
configuration.
new_device is required if the pool is not redundant. If
new_device is not specified, it defaults to old_device.
This form of replacement is useful after an existing
disk has failed and has been physically replaced. In
this case, the new disk may have the same /dev/dsk path
as the old device, even though it is actually a dif-
ferent disk. ZFS recognizes this.
You just need to hot-swap the failed disk (say c0d0) and utter "zpool replace
c0d0" and go have a coffee or something.
--
This message posted from opensolaris.org
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
