Stanislav Filippov wrote:
> Hi, Milek!
> I try to get Sun-Fire-280R to boot zfs-rpool, where 1 of 2 slices is in SAN.
>
> here is a small listing of properties:
>
> {0} ok show-devs
> ........
> /p...@8,600000/SUNW,q...@4
> /p...@8,600000/SUNW,q...@4/f...@0,0
> /p...@8,600000/SUNW,q...@4/f...@0,0/disk
> /p...@8,700000/QLGC,q...@3
> /p...@8,700000/QLGC,q...@1
> /p...@8,700000/s...@6,1
> /p...@8,700000/s...@6
> ..........
>
> {0} ok show-disks
> a) /ramdisk-root
> b) /p...@8,600000/SUNW,q...@4/f...@0,0/disk
> c) /p...@8,700000/QLGC,q...@3/sd
> d) /p...@8,700000/QLGC,q...@1/sd
> e) /p...@8,700000/s...@6,1/disk
> f) /p...@8,700000/s...@6/disk
> q) NO SELECTION
>
> {0} ok printenv boot-device
> boot-device =
> /p...@8,700000/QLGC,q...@3/f...@0,0/s...@w2101001b3233b1b0,0:a
> /p...@8,600000/SUNW,q...@4/f...@0,0/d...@w2100000c504f98ac,0:a disk net
>
> {0} ok boot /p...@8,700000/QLGC,q...@3/f...@0,0/s...@w2101001b3233b1b0,0:a
> Resetting ...
>
> Sun Fire 280R (2 X UltraSPARC-III+) , No Keyboard
> Copyright 1998-2002 Sun Microsystems, Inc. All rights reserved.
> OpenBoot 4.5, 3072 MB memory installed, Serial #54825423.
> Ethernet address 0:3:ba:44:91:cf, Host ID: 834491cf.
>
>
>
> Rebooting with command: boot
> /p...@8,700000/QLGC,q...@3/f...@0,0/s...@w2101001b3233b1b0,0:a
> Boot device: /p...@8,700000/QLGC,q...@3/f...@0,0/s...@w2101001b3233b1b0,0:a
> File and args:
> Evaluating: boot
> /p...@8,700000/QLGC,q...@3/f...@0,0/s...@w2101001b3233b1b0,0:a
>
> Can't locate boot device
>
> BUT!!!:
>
> {0} ok " /p...@8,700000/QLGC,q...@3" select-dev
> QLA2340 2.10 11/15/06
> Firmware version 3.03.21
>
> {0} ok show-children
> ********************** Fabric Attached Devices **********************
> Adapter portId - 51d00
> Device PortId 16300 DeviceId 0 Port WWN 2101001b322f3de7
> Lun 0 DISK FALCON IPSTOR DISK v1.0
>
> Device PortId 16400 DeviceId 1 Port WWN 2101001b3233b1b0
> Lun 0 DISK FALCON IPSTOR DISK v1.0
>
> {0} ok boot /p...@8,700000/QLGC,q...@3/s...@w2101001b322f3de7,0:a
> Boot device: /p...@8,700000/QLGC,q...@3/s...@w2101001b322f3de7,0:a File and
> args:
> Fast Data Access MMU Miss
> ^^^^^^^^^^^^^^^^ i can not get any information about this trouble. Do you
> have any idea?
> WBW, Stanislav
The OBP installed on this system is ancient and could be the cause of the
problems you are seeing. Patch 118323-01 has the latest OBP for the 280R.
Does the system boot ok if you try from the Internal disk?
Regards,
Douglas
--
Dr Doug Baker
Sun Microsystems Systems Support Engineer.
UK Mission Critical Solution Centre.
Tel : 0870 600 3222
_______________________________________________
zfs-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
