Hi all,

I have defined a zfs pool on a Solaris 10 : 

[EMAIL PROTECTED]:/kernel/drv> zpool list
NAME                    SIZE    USED   AVAIL    CAP  HEALTH     ALTROOT
nsrcatalog              125G   72.7G   52.4G    58%  ONLINE     -

[EMAIL PROTECTED]:/kernel/drv> zpool status nsrcatalog
  pool: nsrcatalog
 state: ONLINE
 scrub: none requested
config:

        NAME                       STATE     READ WRITE CKSUM
        nsrcatalog                 ONLINE       0     0     0
          mirror                   ONLINE       0     0     0
            c7t500507630708433Bd0  ONLINE       0     0     0
            c6t5005076307034352d0  ONLINE       0     0     0
          mirror                   ONLINE       0     0     0
            c7t500507630708433Bd1  ONLINE       0     0     0
            c6t5005076307034352d1  ONLINE       0     0     0
          mirror                   ONLINE       0     0     0
            c7t500507630708433Bd2  ONLINE       0     0     0
            c6t5005076307034352d2  ONLINE       0     0     0
          mirror                   ONLINE       0     0     0
            c7t500507630708433Bd3  ONLINE       0     0     0
            c6t5005076307034352d3  ONLINE       0     0     0
          mirror                   ONLINE       0     0     0
            c7t500507630708433Bd4  ONLINE       0     0     0
            c6t5005076307034352d4  ONLINE       0     0     0
          mirror                   ONLINE       0     0     0
            c7t500507630708433Bd5  ONLINE       0     0     0
            c6t5005076307034352d5  ONLINE       0     0     0
          mirror                   ONLINE       0     0     0
            c7t500507630708433Bd6  ONLINE       0     0     0
            c6t5005076307034352d6  ONLINE       0     0     0

errors: No known data errors

I would now like to use mpxio - multipathing driver. So, i will change
the file /kernel/drv/fp.conf and set the parameter mpxio-disable="no";

But, I thing Solaris will change after a reboot the device name !!. What
will be the status of my zpool after the reboot. Do I have to redefine
it ?
How can I preserve data on it ?

Thanks a lot for your help.
Kind regards.
Pierre. 




-----------------------------------------
Visit our website! http://www.nbb.be

"DISCLAIMER: The content of this e-mail message should not be
construed as binding on the part of the National Bank of Belgium
(NBB) unless otherwise and previously stated. The opinions
expressed in this message are solely those of the author and do not
necessarily reflect NBB viewpoints, particularly when the content
of this message, or part thereof, is private by nature or does not
fall within the professional scope of its author."
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss

Reply via email to