Hi All,
I have just installed b90 on an E250 with 2 identical SCSI disks and
zfs root. But I keep getting the error
cannot attach /dev/rdsk/c0t8d0 to c0t0d0s0: device is too small
when I execute
zpool attach rpool c0t0d0s0 /dev/rdsk/c0t8d0
It appears to be a labelling problem of the disk but none of the
tricks such as
# prtvtoc /dev/rdsk/c0t0d0s0 | fmthard -s - /dev/rdsk/c0t8d0
fmthard: Partition 0 overlaps partition 2. Overlap is allowed
only on partition on the full disk partition).
appear to make an identical label.
Format reveals the following:
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/[EMAIL PROTECTED],4000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
1. c0t8d0 <SEAGATE-ST336605LSUN36G-0238-33.92GB>
/[EMAIL PROTECTED],4000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
I would be happy to believe that this was actually a size error,
except that this is the second reinstall and the disks are marked
identically. Any suggestions welcome.
Maurice Castro
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
