I'm looking for ideas to resolve the problem below...
# zpool attach -f zpol01 c0t2d0 c0t3d0
invalid vdev specification
the following errors must be manually repaired:
/dev/dsk/c0t3d0s0 is part of an active ZFS pool on zpool01. Please see
zpool(1M)
# zpool status
pool: zpool01
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
zpool01 ONLINE 0 0 0
c0t2d0 ONLINE 0 0
0
errors: No known data errors
What's happened here is that we've broken a hardware mirror with the
intent to create a ZFS mirror on the two disks. c0t2d0 seems fine as it
is, before and after breaking the mirror, but it seems no matter what I
do to c0t3d0 seems to be messed up. I can't prtvtoc c0t3d0s2 (an I/O
error returns), format/fdisk say c0t3d0s0 is part of an active ZFS pool,
etc. I've done this before more than once, applying config changes to
bring system into what we now know is a more stable config.
Any ideas?
--
Sean
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
