> I used a zpool on a usb key today to get some core files off a non-networked > Thumper running S10U4 beta. > > Plugging the stick into my SXCE b61 x86 machine worked fine; I just had to > 'zpool import sticky' and it worked ok. > > But when we attach the drive to a blade 100 (running s10u3), it sees the > pool as corrupt. I thought I'd been too hasty pulling out the stick, > but it works ok back in the b61 desktop and Thumper. > > I'm trying to figure out if this is an endian thing (which I thought > ZFS was immune from) - or has the b61 machine upgraded the zpool > format?
Most likely the zpool on the usb stick was formatted using a zpool version that s10u3 does not yet support. Check with "zpool version" on the b61 machine which zpool version is supported by b61, any which zpool version is on the usb stick. Repeat on the s10u3 machine. This message posted from opensolaris.org _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
