I have a system that is running Solaris 10 Update 3 TX with 1 zpool and 5
zones. Everything on it is running fine. I take the drive to my disk duplicator
and dupe it bit by bit to another drive, put the newly duped drive in the same
machine and boot it up everything boots up fine. Then I do a zpool status
<zpool name> the status is FAULTED, I get the error insufficient replicas. The
slice it is mounted to is c0d0s4 and it's error is cannot open. The action
stated is use the zpool online command but that does not work. Also brining up
format is states that c0d0s4 is used for a zpool. I checked with the
manufacture of the drive duplicator to see if there was any known issues with
ZFS and their machine and it didn't sound like the tech had ever heard of ZFS.
But I have it set to do a bit by bit copy with a checksum verification when it
completes. Does anyone happen to have an idea of why this may be failing?
This message posted from opensolaris.org
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
