Never the less I get the following error:
bash-3.00# zpool attach mypool emcpower0a
missing <new_device> specification
usage:
attach [-f] <pool> <device> <new_device>
bash-3.00# zpool status
pool: mypool
state: ONLINE
scrub: resilver completed with 0 errors on Thu May 31 23:01:09 2007
config:
NAME STATE READ WRITE CKSUM
mypool ONLINE 0 0 0
mirror ONLINE 0 0 0
c1t2d0 ONLINE 0 0 0
c1t3d0 ONLINE 0 0 0
errors: No known data errors
bash-3.00# zpool attach mypool c1t2d0 emcpower0a
cannot attach emcpower0a to c1t2d0: device is too small
bash-3.00#
Is there anyway to add that emc san to zfs at all? It seems like that emcpower0a
cannot be added in any way...
but check this out, I did try to add it in as a new pool and here is what I got:
bash-3.00# zpool create mypool2 emcpower0a
bash-3.00# zpool status
pool: mypool
state: ONLINE
scrub: resilver completed with 0 errors on Thu May 31 23:01:09 2007
config:
NAME STATE READ WRITE CKSUM
mypool ONLINE 0 0 0
mirror ONLINE 0 0 0
c1t2d0 ONLINE 0 0 0
c1t3d0 ONLINE 0 0 0
errors: No known data errors
pool: mypool2
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
mypool2 ONLINE 0 0 0
emcpower0a ONLINE 0 0 0
errors: No known data errors
bash-3.00# zpool list
NAME SIZE USED AVAIL CAP HEALTH ALTROOT
mypool 68G 53.1G 14.9G 78% ONLINE -
mypool2 123M 83.5K 123M 0% ONLINE -
bash-3.00#
On Fri, 1 Jun 2007, Will Murnane wrote:
On 5/31/07, Krzys <[EMAIL PROTECTED]> wrote:
so I do run replace command and I get and error:
bash-3.00# zpool replace mypool c1t2d0 emcpower0a
cannot replace c1t2d0 with emcpower0a: device is too small
Try "zpool attach mypool emcpower0a"; see
http://docs.sun.com/app/docs/doc/819-5461/6n7ht6qrt?a=view .
Will
!DSPAM:122,465fa1d813332148481500!
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
