Awesome, that worked great for me... I did not know I had to put c1t2d0 in
there... but hey, it works and that is all it matters. Thank you so very much.
Chris
[19:58:24] @zglobix1: /root > zpool attach -f mypool c1t2d0 c1t3d0
[19:58:33] @zglobix1: /root > zpool list
NAME SIZE USED AVAIL CAP HEALTH ALTROOT
mypool 278G 48.5G 230G 17% ONLINE -
[19:58:37] @zglobix1: /root > zpool status
pool: mypool
state: ONLINE
status: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scrub: resilver in progress, 0.03% done, 6h59m to go
config:
NAME STATE READ WRITE CKSUM
mypool ONLINE 0 0 0
mirror ONLINE 0 0 0
c1t2d0 ONLINE 0 0 0
c1t3d0 ONLINE 0 0 0
errors: No known data errors
[19:58:47] @zglobix1: /root > zpool scrub mypool
cannot scrub mypool: currently resilvering
[19:58:59] @zglobix1: /root >
[19:59:03] @zglobix1: /root >
[19:59:04] @zglobix1: /root > zpool status -x
pool: mypool
state: ONLINE
status: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scrub: resilver in progress, 0.11% done, 8h39m to go
config:
NAME STATE READ WRITE CKSUM
mypool ONLINE 0 0 0
mirror ONLINE 0 0 0
c1t2d0 ONLINE 0 0 0
c1t3d0 ONLINE 0 0 0
errors: No known data errors
[19:59:08] @zglobix1: /root >
On Wed, 28 Mar 2007, Robert Milkowski wrote:
Hello Krzys,
Wednesday, March 28, 2007, 10:58:40 PM, you wrote:
K> Hello folks, I have a small problem, originally I had this setup:
K> [16:39:40] @zglobix1: /root > zpool status -x
K> pool: mypool
K> state: DEGRADED
K> status: One or more devices could not be opened. Sufficient replicas exist
for
K> the pool to continue functioning in a degraded state.
K> action: Attach the missing device and online it using 'zpool online'.
K> see: http://www.sun.com/msg/ZFS-8000-D3
K> scrub: resilver completed with 0 errors on Wed Mar 28 16:39:23 2007
K> config:
K> NAME STATE READ WRITE CKSUM
K> mypool DEGRADED 0 0 0
K> mirror DEGRADED 0 0 0
K> c1t2d0 ONLINE 0 0 0
K> c1t3d0 UNAVAIL 0 0 0 cannot open
K> errors: No known data errors
K> so I was trying to get that device back online working and I did mess it
up...
K> I did run:
K> zpool detach mypool c1t3d0
K> and now I lost my mirroring
K> [16:40:14] @zglobix1: /root > zpool status
K> pool: mypool
K> state: ONLINE
K> scrub: resilver completed with 0 errors on Wed Mar 28 16:39:23 2007
K> config:
K> NAME STATE READ WRITE CKSUM
K> mypool ONLINE 0 0 0
K> c1t2d0 ONLINE 0 0 0
K> errors: No known data errors
K> is there any way to get my mirror back on that pool?
K> I have V240 with Solaris 10 U3 and its limited on how many disks I can have
in
K> that system so I was unable to do replace or anything, I did try to reboot
K> system and did try tog et it working to have mirroring back in place but for
K> some reason was unable to do it.
K> Anyway I would appreciate your help.
First check if c1t3d0 is ok (format c1t3d0) if it is then issue:
zpool attach mypool c1t2d0 c1t3d0
And you'll get you mirror back :)
--
Best regards,
Robert mailto:[EMAIL PROTECTED]
http://milek.blogspot.com
!DSPAM:122,460adb7817910266247132!
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
