[EMAIL PROTECTED] wrote on 01/29/2007 03:45:58 PM: > I attempted to increase my zraid from 2 disks to 3, but it looks > like I added the drive outside of the raid: > > # zpool list > > NAME SIZE USED AVAIL CAP HEALTH ALTROOT > amber 1.36T 879G 516G 63% ONLINE - > home 65.5G 1.30M 65.5G 0% ONLINE - > [EMAIL PROTECTED]:/export/home/michael# > [EMAIL PROTECTED]:/export/home/michael# zpool status > pool: amber > state: ONLINE > scrub: none requested > config: > > NAME STATE READ WRITE CKSUM > amber ONLINE 0 0 0 > raidz1 ONLINE 0 0 0 > c1d0 ONLINE 0 0 0 > c0d0 ONLINE 0 0 0 > c4d0 ONLINE 0 0 0 > > errors: No known data errors > > > I can't even seem to get rid of c4d0, I have not written anything to > "amber" since adding c4d0. Any suggestions on how to remove it and > re add it correctly? > Sure, just run: zpool evacuate amber c4t0. =) Sorry. This was just in a few threads here, you will need to dump your data to tape (or another disk), destroy your pool and then recreate it. _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
