Hi,
I deployed ZFS on our mailserver recently, hoping for eternal peace after
running on UFS and moving files witch each TB added.
It is mailserver - it's mdirs are on ZFS pool:
capacity operations bandwidth
pool used avail read write read write
------------------------- ----- ----- ----- ----- ----- -----
mailstore 3.54T 2.08T 280 295 7.10M 5.24M
mirror 590G 106G 34 31 676K 786K
c6t3d0 - - 14 16 960K 773K
c8t22260001552EFE2Cd0 - - 16 18 1.06M 786K
mirror 613G 82.9G 51 37 1.44M 838K
c6t3d1 - - 20 19 1.57M 824K
c5t1d1 - - 20 24 1.40M 838K
c8t227C0001559A761Bd0 - - 5 101 403K 4.63M
mirror 618G 78.3G 133 60 6.23M 361K
c6t3d2 - - 40 27 3.21M 903K
c4t2d0 - - 23 81 1.91M 2.98M
c8t221200015599F2CFd0 - - 6 108 442K 4.71M
mirror 613G 83.2G 110 51 3.66M 337K
c6t3d3 - - 36 25 2.72M 906K
c5t2d1 - - 29 65 1.80M 2.92M
mirror 415G 29.0G 30 28 460K 278K
c6t3d4 - - 11 19 804K 268K
c4t1d2 - - 15 22 987K 278K
mirror 255G 441G 26 49 536K 1.02M
c8t22110001552F3C46d0 - - 12 27 835K 1.02M
c8t224B0001559BB471d0 - - 12 29 835K 1.02M
mirror 257G 439G 32 52 571K 1.04M
c8t22480001552D7AF8d0 - - 14 28 1003K 1.04M
c4t1d0 - - 14 32 1002K 1.04M
mirror 251G 445G 28 53 543K 1.02M
c8t227F0001552CB892d0 - - 13 28 897K 1.02M
c8t22250001559830A5d0 - - 13 30 897K 1.02M
mirror 17.4G 427G 22 38 339K 393K
c8t22FA00015529F784d0 - - 9 19 648K 393K
c5t2d2 - - 9 23 647K 393K
It is 3x dual-iSCSI + 2x dual SCSI DAS arrays (RAID0, 13x250).
I have problem however:
The 2 SCSI arrays were able to handle the mail-traffic fine with UFS on them.
The new config with 3 additional arrays seem to have problem using ZFS.
The writes are waiting for 10-15 seconds to get to disk - so queue fills ver
quickly, reads are quite ok.
I assume this is the problem with ZFS prefering reads to writes.
I also see in 'zpool iostat -v 1' that writes are issued to disk only once in
10 secs, and then its 2000rq one sec.
Reads are sustained at cca 800rq/s.
Is there a way to tune this read/write ratio? Is this know problem?
I tried to change vq_max_pending as suggested by Eric in
http://blogs.sun.com/erickustarz/entry/vq_max_pending
But no change in this write behaviour.
Iostat shows cca 20-30ms asvc_t, 0%w, and cca 30% busy on all drives so these
are not saturated it seems. (before with UTF they had 90%busy, 1%wait).
System is Sol 10 U2, sun x4200, 4GB RAM.
Please if you could give me some hint to really make this working as the way
back to UFS is almost impossible on live system.
--
Ivan Debnár
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
