Hi, On Wed, Sep 4, 2019 at 6:56 PM Greg Wilson-Lindberg <gwil...@sakuraus.com> wrote: > > > -----Original Message----- > > From: Belisko Marek [mailto:marek.beli...@gmail.com] > > Sent: Wednesday, September 04, 2019 12:26 AM > > To: Greg Wilson-Lindberg <gwil...@sakuraus.com> > > Cc: Yocto list discussion <yocto@yoctoproject.org> > > Subject: Re: [yocto] [meta-raspberrypi] Confusion about U-Boot setup > > > > Hi, > > > > On Tue, Sep 3, 2019 at 8:58 PM Greg Wilson-Lindberg <gwil...@sakuraus.com> > > wrote: > > > > > > I've configured a sumo build, by way of QT's boot2qt to use u-boot and I > > > am > > seeing a u-boot prompt for keypress to drop out of automatic booting on > > startup, but > > I don't see any configuration scripts for u-boot (uEnv.txt or a script) on > > the image or > > in the build tmp/ dir. > > > > > > For the raspberry pi, how is u-boot configured on startup? > > there is u-boot variable called bootdelay which can be set to e.g. 2 to > > wait until > > autoboot for 2 secs. I think this is the case. Thanks. > > There is a variable "BOOT_DELAY", that is used to tell the Raspberry Pi boot > loader to delay after setting up the graphics and before loading the kernel. > This has nothing to do with u-boot. There should be some way to change the > u-boot delay that waits for user input, among other things, I just haven't > been able to find it yet and was wondering if someone could point me to where > it can be found. I think you need to look at u-boot source. Such thing is not available in yocto IIRC. > > BR, > Greg > > > > > > > Regards, > > > Greg Wilson-Lindberg > > > > > > -- > > > _______________________________________________ > > > yocto mailing list > > > yocto@yoctoproject.org > > > https://lists.yoctoproject.org/listinfo/yocto > > > > BR, > > > > marek
BR, marek -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
