Yes, thanks Maciej for pointing that out! It may be a good starting point for JH.
Gabriele Il giorno lun 15 lug 2019 alle ore 10:29 Maciej Pijanowski < maciej.pijanow...@3mdeb.com> ha scritto: > > On 15.07.2019 08:45, Gabriele Zampieri wrote: > > Hi, > > as far as I know, there is no mechanism to add custom bootargs and/or > bootcmd to uboot via Yocto (correct me if I'm wrong). I usually patch the > upstream uboot to achieve this task. > > I also haven't heard of any standardized way. It may depend on the target > hardware > and the BSP layer you are using. Apart from patching the U-Boot, there > also might > be boot.cmd script to modify or the config.txt in case of the RPI, for > example. > > > Best regards, > Gabriele > > Il giorno lun 8 lug 2019 alle ore 22:43 JH <jupiter....@gmail.com> ha > scritto: > >> Hi, >> >> Which Yocto files and which statement can I add my own U-Boot bootargs >> and bootcmd? >> >> Thank you. >> >> - jupiter >> -- >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto >> > > -- > Maciej Pijanowski > Embedded Systems Engineerhttps://3mdeb.com | @3mdeb_com > > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto >
-- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
