Thank you very much Gabriele, appreciate it.
On 7/2/19, Gabriele Zampieri <gabbla.mal...@gmail.com> wrote: > Since UBOOT_CONFIG is a standard property, I suggest you to read the > following links: > > - > > https://www.yoctoproject.org/docs/latest/mega-manual/mega-manual.html#var-UBOOT_CONFIG > - > > https://www.yoctoproject.org/docs/latest/mega-manual/mega-manual.html#var-UBOOT_MACHINE > > Please not that the links I provided refers to the latest documentation, > you should check the docs for your YP version. > > About testing, I have no idea about how to test uboot without the target > board. If you are planning to use a commercial solution which is supported > by Yocto, you should be safe enough for now. > > Gabriele > > Il giorno mar 2 lug 2019 alle ore 09:40 JH <jupiter....@gmail.com> ha > scritto: > >> Thanks Gabriele, you are right, it did not work in command line but it >> did not complain after UBOOT_CONFIG = "nand" to local.conf, how can I >> am sure it is built to boot from nand? I don't have a board to try >> yet. >> >> Thank you very much. >> >> Kind regards, >> >> - jh >> >> >> On 7/2/19, Gabriele Zampieri <gabbla.mal...@gmail.com> wrote: >> > Hi, >> > >> > you must use double quotes around nand, so: >> > UBOOT_CONFIG = "nand" >> > >> > However I cannot guarantee this line will be the solution, I usually >> > use >> a >> > customized uboot. >> > >> > Gabriele >> > >> > Il giorno mar 2 lug 2019 alle ore 04:07 JH <jupiter....@gmail.com> ha >> > scritto: >> > >> >> Hi, >> >> >> >> The imx6ullevk.conf defined sdcard for booting on imx6 EVK: >> >> >> >> imx6ullevk.conf >> >> >> >> UBOOT_CONFIG ??= "sd" >> >> UBOOT_CONFIG[sd] = "mx6ull_14x14_evk_config,sdcard" >> >> UBOOT_CONFIG[mfgtool] = "mx6ull_14x14_evk_config" >> >> >> >> I need to change it for a customized board referenced from imx6 EVK >> >> but booting from NAND, there are some blogs said it can be done to add >> >> UBOOT_CONFIG=nand either in local.conf or command line. I tried it did >> >> not work: >> >> >> >> ERROR: Unable to start bitbake server (None) >> >> --- Starting bitbake server pid 2673 at 2019-07-02 11:54:24.011086 --- >> >> ERROR: local.conf:34: unparsed line: 'UBOOT_CONFIG=nand' >> >> >> >> What should be a proper process to overwrite imx6ullevk.conf >> >> UBOOT_CONFIG from sdcard to nand? >> >> >> >> Thank you. >> >> >> >> Kind regards, >> >> >> >> - JH >> >> -- >> >> _______________________________________________ >> >> yocto mailing list >> >> yocto@yoctoproject.org >> >> https://lists.yoctoproject.org/listinfo/yocto >> >> >> > >> > -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
