Hello PierLuigi, I almost immediately read your attached log file. And this cot my eye: *>>> U-Boot SPL 2012.10-gcbef171* (Mar 09 2016 - 17:01:14)
Seems, that you have U-Boot version from Y2012 (2012.10)??? For the starters, could you, please, update your FW to U-boot version 2019.01 at least! And try the same conditions again? Thank you, Zoran _______ On Wed, Apr 17, 2019 at 9:06 PM Pierluigi Greto <pierluigi.gr...@bisdn.de> wrote: > Hi Zoran, > > thank you for the reply. > [1] In this you can find some information about the device (link > <https://github.com/opencomputeproject/OpenNetworkLinux/blob/master/packages/platforms/delta/armel/arm-delta-ag6248c/arm-delta-ag6248c-poe/platform-config/r0/src/lib/arm-delta-ag6248c-poe-r0.yml>). > In this patch the dts (link > <https://github.com/opencomputeproject/OpenNetworkLinux/blob/663642e817c33d44d5e4dd1f98247addd68c9f5c/packages/base/any/kernels/3.2-lts/configs/arm-iproc-all/patches/platform-delta-ag6248c-device-drivers.patch>). > The platform is an arm cortexa9. > [2] This is how I install the image > > install_uimage() { echo "Format Nand Flash region\n" flash_erase > /dev/mtd-open 0 0 nandwrite -p /dev/mtd-open > fitImage-core-image-base-delta-ag6248c-poe.bin sync; sync}hw_load() { > echo "nand read \$loadaddr open 0x1000000 && run fpboot && bootm"} > > I'll attach the log from when I install the image to when it the kernel > hangs. > > Thank you, > Pierluigi > On 17/04/19 17:26, Zoran Stojsavljevic wrote: > > Hello PierLuigi, > > [1] Which arm platform (based upon which arm Open Sorce platform) you are > using? > [2] Please, can we see your added proprietary ash script to U-Boot default > env? > > Thank you, > Zoran > _______ > > On Wed, Apr 17, 2019 at 5:13 PM Pierluigi Greto<pierluigi.gr...@bisdn.de> > <pierluigi.gr...@bisdn.de> wrote: > > Hi all, > > I'm trying to build an image for an arm platform with uboot. After the > installation, when the system is starting it hangs at "Starting kernel > ...". In the log I can see that the kernel uncompressed image, the > ramdisk subimage and the Flat Device Tree are found. But the kernel > doesn't start. > Any hints on how to check what it's wrong with the image? For example if > the kernel is correctly compiled, the FTD is the right one ecc. > The loaded kernel is shown as "uncompressed", there is some way to > define the compression type in yocto (I have an image that works and the > kernel is shown as "gzip compressed")? Could the compression type be a > problem? > > Any hint is very welcome. > > Thank you, > Pierluigi > > -- > _______________________________________________ > yocto mailing > listyocto@yoctoproject.orghttps://lists.yoctoproject.org/listinfo/yocto > >
-- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
