Hello Nikola, Let us try to cut to the chase!
After reading what Marc Ferland says/writes, and looking into the following: https://bugzilla.redhat.com/show_bug.cgi?id=1650634 I have spotted the following: *Pat Riehecky ** 2018-11-20 14:28:22 UTC * *the bug remains with the elrepo kernels:kernel-ml-4.19.2-1.el7.elrepo.x86_64kernel-lt-4.4.163-1.el7.elrepo.x86_64* I never had this problem since I do not use Xorg (GFX), rather I only use serial console from VBox VM from my BBB (pass-through). Thus, my suggestion for you, to skip the whole mess is to rebuild your distro *in the light of YOCTO Project 2.6.1 (thud 20.0.0.1).* My best guess (then you'll inherit YOCTO kernel 4.20.x with fixed Xorg - X11). I am using Fedora 29 on my laptop. Also from the bugzilla: *Pat Riehecky ** 2018-11-20 15:46:11 UTC * *Bug resolved by rebuilding xorg-x11-server-1.20.3-1.fc29 [1] for 7.6.* *With this in mind it appears to be an Xorg server bug rather than fbdev.* >From my HP EliteBook 840 G1 Fedora 29, Xorg.0.log - February 5th, 2019., I have the following: [ 26.955] Kernel command line: BOOT_IMAGE=/ *vmlinuz-4.20.6-200.fc29.x86_64* root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=en_US.UTF-8 [ 26.955] Build Date: 11 January 2019 12:47:38PM *[ 26.955] Build ID: xorg-x11-se**rver 1.20.3-3.fc29* [ 26.955] Current version of pixman: 0.34.0 Best Regards, Zoran _______ On Tue, Feb 5, 2019 at 2:49 PM Zoran Stojsavljevic < zoran.stojsavlje...@gmail.com> wrote: > > Hello Nikola, > > > I created a kernel recipe with a bbappend file, and, I added > > the same defconfig that I used for krogoth version. > > The bbappend for kernel recipe concern meta-ti layer. > > I didn't edited defconfig file in other layers which contain a > > kernel recipe. > > It could be some problem that Sumo does not take your bbappend file into the > consideration as placed. > > It could be something else, as well. > > I have the same issue with my defconfig file for my Thud Beagle Bone Black (BBB) > standard board. Every time I recompile my YOCTO for it for different releases, I need > to import my specific defconfig. But I use complete different repos for my standard > Beagle Bone Black than YOCTO BBB Poky reference distro. > > Here is what I use in Thud (my bblayers.conf): > > POKY_BBLAYERS_CONF_VERSION = "2" > BBPATH = "${TOPDIR}" > BBFILES ?= "" > > BBLAYERS ?= " \ > /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb \ > /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-networking \ > /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-oe \ > /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-python \ > /home/user/projects2/beaglebone-black/yocto-thud/meta-qt5 \ > /home/user/projects2/beaglebone-black/yocto-thud/poky/meta \ > /home/user/projects2/beaglebone-black/yocto-thud/poky/meta-poky" > > There, I replace defconfig in this layer: /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb > with my own defconfig. > > In the directory: > /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb/recipes-kernel/linux/linux-stable-4.19/beaglebone > > If you use only Poky repository, then you need to read the following paragraph (how to use > your defconfig with Poky): > > [2.3.3. Changing the Configuration] YOCTO Project Linux Development Manual > https://www.yoctoproject.org/docs/2.5/kernel-dev/kernel-dev.html#using-an-in-tree-defconfig-file > 2.3.3. Changing the Configuration > > I hope this will help. Please, keep us posted! > > Zoran > _______ > > > On Tue, Feb 5, 2019 at 10:54 AM Stanisavljevic < n.stanisavlje...@polycaptil.fr> wrote: >> >> Hy Zoran >> >> Thank's to take time to answer >> >> I created a kernel recipe with a bbappend file, and, I added the same defconfig that I used for krogoth version. >> The bbappend for kernel recipe concern meta-ti layer. >> I didn't edited defconfig file in other layers which contain a kernel recipe. >> >> I think it's a problem which concern the screen resolution, screen frequency and adc touchscreen. >> Something is different between the krogoth and sumo version, but I didn't find what is changed... >> >> Xrandr show that problem is maybe around the screen resolution. >> It's show the next message : "Size 1024x768 not found in available modes" >> Maybe it was changed between krogoth and sumo version...but I don't know where it is indicated if sources files... >> >> What do you think ? problem can be around the screen resolution, screen frequency and adc touchscreen ? >> >> Nikola >> >> -----Message d'origine----- >> De : Zoran Stojsavljevic <zoran.stojsavlje...@gmail.com> >> Envoyé : lundi 4 février 2019 17:08 >> À : Stanisavljevic <n.stanisavlje...@polycaptil.fr> >> Cc : Yocto Project <yocto@yoctoproject.org> >> Objet : Re: [yocto] yocto touchscreen >> >> > I built a first version of this os with version krogoth and it works fine. >> > >> > Now I build a second version of this os with version sumo and the >> > touch screen works fine during boot process but when kernel is loaded, >> > touchscreen freeze / lock and impossible to use it. >> >> Did you compare Krogoth kernel defconfig with Sumo kernel defconfig? >> >> May there are some mismatches in drivers' setup between these two? >> >> Zoran >> _______ >> >> On Mon, Feb 4, 2019 at 12:24 PM Stanisavljevic < n.stanisavlje...@polycaptil.fr> wrote: >> > >> > Hy Team, >> > >> > >> > >> > I have a problem >> > >> > >> > >> > I buid a custom os for AM335x processor and I used yocto to do it. >> > >> > >> > >> > I build a first version of this os with version krogoth and it work fine. >> > >> > >> > >> > Now I build a second version of this os with version sumo and the touchscreen work fine during boot process but when kernel is loaded, touchscreen freeze / lock and impossible to use it. >> > >> > The terminal is printed on the touchscreen but the screen is locked, impossible to write a command or to move the mouse to select, …. >> > >> > >> > >> > Here is the log of boot to the user session (log got with serial communication between PC and board) : >> > >> > >> > >> > U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57) >> > >> > Trying to boot from MMC1 >> > >> > reading uboot.env >> > >> > reading u-boot.img >> > >> > reading u-boot.img >> > >> > reading u-boot.img >> > >> > reading u-boot.img >> > >> > >> > >> > >> > >> > U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200) >> > >> > >> > >> > CPU : AM335X-GP rev 2.1 >> > >> > Model: TI AM335x EVM-SK >> > >> > DRAM: 256 MiB >> > >> > NAND: 0 MiB >> > >> > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 >> > >> > reading uboot.env >> > >> > ERROR: No USB device found >> > >> > >> > >> > at drivers/usb/gadget/ether.c:2709/usb_ether_init() >> > >> > Net: CACHE: Misaligned operation at range [8df323c0, 8df32464] >> > >> > >> > >> > Warning: ethernet@4a100000 using MAC address from ROM >> > >> > eth0: ethernet@4a100000 >> > >> > Hit any key to stop autoboot: 0 >> > >> > reading zImage >> > >> > 3412752 bytes read in 251 ms (13 MiB/s) >> > >> > reading dtb >> > >> > 39733 bytes read in 12 ms (3.2 MiB/s) >> > >> > ## Flattened Device Tree blob at 82000000 >> > >> > Booting using the fdt blob at 0x82000000 >> > >> > Loading Device Tree to 8df19000, end 8df25b34 ... OK >> > >> > >> > >> > Starting kernel ... >> > >> > >> > >> > [ 0.000000] Booting Linux on physical CPU 0x0 >> > >> > [ 0.000000] Initializing cgroup subsys cpu >> > >> > [ 0.000000] Initializing cgroup subsys cpuacct >> > >> > [ 0.000000] Linux version 4.4.19-ge581bb1cac (polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT Thu May 24 11:42:17 CEST 2018 >> > >> > [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d >> > >> > [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache >> > >> > [ 0.000000] Machine model: TI AM335x EVM-SK >> > >> > [ 0.000000] cma: Reserved 48 MiB at 0x8a800000 >> > >> > [ 0.000000] Memory policy: Data cache writeback >> > >> > [ 0.000000] CPU: All CPU(s) started in SVC mode. >> > >> > [ 0.000000] AM335X ES2.1 (sgx neon ) >> > >> > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64960 >> > >> > [ 0.000000] Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw >> > >> > [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) >> > >> > [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) >> > >> > [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) >> > >> > [ 0.000000] Memory: 200444K/262144K available (6495K kernel code, 313K rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K highmem) >> > >> > [ 0.000000] Virtual kernel memory layout: >> > >> > [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) >> > >> > [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) >> > >> > [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) >> > >> > [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) >> > >> > [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) >> > >> > [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) >> > >> > [ 0.000000] .text : 0xc0008000 - 0xc08b0034 (8865 kB) >> > >> > [ 0.000000] .init : 0xc08b1000 - 0xc08f2000 ( 260 kB) >> > >> > [ 0.000000] .data : 0xc08f2000 - 0xc09407f0 ( 314 kB) >> > >> > [ 0.000000] .bss : 0xc09407f0 - 0xc0982d58 ( 266 kB) >> > >> > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 >> > >> > [ 0.000000] Preemptible hierarchical RCU implementation. >> > >> > [ 0.000000] Build-time adjustment of leaf fanout to 32. >> > >> > [ 0.000000] NR_IRQS:16 nr_irqs:16 16 >> > >> > [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts >> > >> > [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz >> > >> > [ 0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns >> > >> > [ 0.000036] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns >> > >> > [ 0.000047] OMAP clocksource: timer1 at 24000000 Hz >> > >> > [ 0.000222] clocksource_probe: no matching clocksources found >> > >> > [ 0.000415] Console: colour dummy device 80x30 >> > >> > [ 0.000442] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' >> > >> > [ 0.000448] This ensures that you still see kernel messages. Please >> > >> > [ 0.000454] update your kernel commandline. >> > >> > [ 0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216) >> > >> > [ 0.089064] pid_max: default: 32768 minimum: 301 >> > >> > [ 0.089193] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) >> > >> > [ 0.089205] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) >> > >> > [ 0.089932] Initializing cgroup subsys io >> > >> > [ 0.089964] Initializing cgroup subsys memory >> > >> > [ 0.090005] Initializing cgroup subsys devices >> > >> > [ 0.090021] Initializing cgroup subsys freezer >> > >> > [ 0.090036] Initializing cgroup subsys perf_event >> > >> > [ 0.090048] Initializing cgroup subsys pids >> > >> > [ 0.090078] CPU: Testing write buffer coherency: ok >> > >> > [ 0.090499] Setting up static identity map for 0x80008200 - 0x80008258 >> > >> > [ 0.092680] devtmpfs: initialized >> > >> > [ 0.105440] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 >> > >> > [ 0.120529] omap_hwmod: debugss: _wait_target_disable failed >> > >> > [ 0.175584] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns >> > >> > [ 0.179852] pinctrl core: initialized pinctrl subsystem >> > >> > [ 0.181216] NET: Registered protocol family 16 >> > >> > [ 0.183420] DMA: preallocated 256 KiB pool for atomic coherent allocations >> > >> > [ 0.209061] cpuidle: using governor ladder >> > >> > [ 0.239048] cpuidle: using governor menu >> > >> > [ 0.243661] OMAP GPIO hardware version 0.1 >> > >> > [ 0.254360] hw-breakpoint: debug architecture 0x4 unsupported. >> > >> > [ 0.297629] edma 49000000.edma: TI EDMA DMA engine driver >> > >> > [ 0.298606] reg-fixed-voltage fixedregulator@2: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, deferring probe >> > >> > [ 0.302364] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe >> > >> > [ 0.302525] media: Linux media interface: v0.10 >> > >> > [ 0.302588] Linux video capture interface: v2.00 >> > >> > [ 0.302638] pps_core: LinuxPPS API ver. 1 registered >> > >> > [ 0.302646] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giome...@linux.it> >> > >> > [ 0.302676] PTP clock support registered >> > >> > [ 0.302741] EDAC MC: Ver: 3.0.0 >> > >> > [ 0.303966] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 >> > >> > [ 0.304332] Advanced Linux Sound Architecture Driver Initialized. >> > >> > [ 0.305512] clocksource: Switched to clocksource timer1 >> > >> > [ 0.316775] NET: Registered protocol family 2 >> > >> > [ 0.317599] TCP established hash table entries: 2048 (order: 1, 8192 bytes) >> > >> > [ 0.317636] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) >> > >> > [ 0.317663] TCP: Hash tables configured (established 2048 bind 2048) >> > >> > [ 0.317748] UDP hash table entries: 256 (order: 0, 4096 bytes) >> > >> > [ 0.317767] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) >> > >> > [ 0.317925] NET: Registered protocol family 1 >> > >> > [ 0.318352] RPC: Registered named UNIX socket transport module. >> > >> > [ 0.318366] RPC: Registered udp transport module. >> > >> > [ 0.318372] RPC: Registered tcp transport module. >> > >> > [ 0.318379] RPC: Registered tcp NFSv4.1 backchannel transport module. >> > >> > [ 0.319330] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available >> > >> > [ 0.321392] futex hash table entries: 256 (order: -1, 3072 bytes) >> > >> > [ 0.329780] squashfs: version 4.0 (2009/01/31) Phillip Lougher >> > >> > [ 0.330717] NFS: Registering the id_resolver key type >> > >> > [ 0.330798] Key type id_resolver registered >> > >> > [ 0.330807] Key type id_legacy registered >> > >> > [ 0.330886] ntfs: driver 2.1.32 [Flags: R/O]. >> > >> > [ 0.334673] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) >> > >> > [ 0.334706] io scheduler noop registered >> > >> > [ 0.334719] io scheduler deadline registered >> > >> > [ 0.334877] io scheduler cfq registered (default) >> > >> > [ 0.336555] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 >> > >> > [ 0.339415] backlight supply power not found, using dummy regulator >> > >> > [ 0.402480] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled >> > >> > [ 0.406962] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250 >> > >> > [ 1.017357] console [ttyS0] enabled >> > >> > [ 1.022206] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud = 3000000) is a 8250 >> > >> > [ 1.032273] [drm] Initialized drm 1.1.0 20060810 >> > >> > [ 1.039564] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). >> > >> > [ 1.046349] [drm] No driver support for vblank timestamp query. >> > >> > [ 1.062121] Console: switching to colour frame buffer device 60x34 >> > >> > [ 1.070360] tilcdc 4830e000.lcdc: fb0: frame buffer device >> > >> > [ 1.105531] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0 >> > >> > [ 1.118644] loop: module loaded >> > >> > [ 1.124253] libphy: Fixed MDIO Bus: probed >> > >> > [ 1.185550] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 >> > >> > [ 1.191695] davinci_mdio 4a101000.mdio: detected phy mask fffffffe >> > >> > [ 1.198786] libphy: 4a101000.mdio: probed >> > >> > [ 1.202886] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 >> > >> > [ 1.212890] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba >> > >> > [ 1.220531] cpsw 4a100000.ethernet: cpsw: Detected MACID = c4:ed:ba:88:2a:92 >> > >> > [ 1.229382] mousedev: PS/2 mouse device common for all mice >> > >> > [ 1.235845] i2c /dev entries driver >> > >> > [ 1.240508] cpuidle: enable-method property 'ti,am3352' found operations >> > >> > [ 1.248197] omap_hsmmc 48060000.mmc: Got CD GPIO >> > >> > [ 1.275713] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins >> > >> > [ 1.282895] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins >> > >> > [ 1.317159] ledtrig-cpu: registered to indicate activity on CPUs >> > >> > [ 1.326069] NET: Registered protocol family 10 >> > >> > [ 1.332092] sit: IPv6 over IPv4 tunneling driver >> > >> > [ 1.337715] NET: Registered protocol family 17 >> > >> > [ 1.342510] Key type dns_resolver registered >> > >> > [ 1.347095] omap_voltage_late_init: Voltage driver support not added >> > >> > [ 1.407145] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0 >> > >> > [ 1.415278] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz >> > >> > [ 1.421665] omap_hsmmc 48060000.mmc: Got CD GPIO >> > >> > [ 1.426813] vmmc: supplied by vbat >> > >> > [ 1.466341] pinctrl-single 44e10800.pinmux: bad data for mux pinmux_mmc2_pins >> > >> > [ 1.474737] pinctrl-single 44e10800.pinmux: no pins entries for pinmux_mmc2_pins >> > >> > [ 1.513247] mmc0: host does not support reading read-only switch, assuming write-enable >> > >> > [ 1.523414] mmc0: new high speed SDHC card at address 0001 >> > >> > [ 1.529635] mmcblk0: mmc0:0001 AS 3.72 GiB >> > >> > [ 1.535996] mmcblk0: p1 p2 p3 >> > >> > [ 1.595932] vdd_mpu: supplied by vbat >> > >> > [ 1.602167] input: gpio_buttons@0 as /devices/platform/gpio_buttons@0/input/input0 >> > >> > [ 1.618291] tps65910-rtc tps65910-rtc: setting system clock to 2019-02-01 20:07:49 UTC (1549051669) >> > >> > [ 1.639394] lis3_reg: disabling >> > >> > [ 1.655732] ALSA device list: >> > >> > [ 1.658720] No soundcards found. >> > >> > [ 1.678290] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities >> > >> > [ 1.696920] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities >> > >> > [ 2.183999] EXT4-fs (mmcblk0p3): recovery complete >> > >> > [ 2.196864] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) >> > >> > [ 2.205084] VFS: Mounted root (ext4 filesystem) on device 179:3. >> > >> > [ 2.225670] devtmpfs: mounted >> > >> > [ 2.235781] Freeing unused kernel memory: 260K (c08b1000 - c08f2000) >> > >> > [ 2.242162] This architecture does not have kernel memory protection. >> > >> > INIT: version 2.88 booting >> > >> > Starting udev >> > >> > [ 3.090091] udevd[78]: starting version 3.2.5 >> > >> > [ 3.106175] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available) >> > >> > [ 3.118667] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available) >> > >> > [ 3.128014] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available) >> > >> > [ 3.137335] random: udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available) >> > >> > [ 3.218433] udevd[79]: starting eudev-3.2.5 >> > >> > [ 3.325886] random: udevd: uninitialized urandom read (16 bytes read, 29 bits of entropy available) >> > >> > [ 3.346155] random: udevd: uninitialized urandom read (16 bytes read, 29 bits of entropy available) >> > >> > [ 4.820708] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered >> > >> > [ 5.548283] random: dd: uninitialized urandom read (512 bytes read, 43 bits of entropy available) >> > >> > INIT: Entering runlevel: 5 >> > >> > Configuring network interfaces... [ 5.820546] net eth0: initializing cpsw version 1.12 (0) >> > >> > [ 5.825987] net eth0: initialized cpsw ale version 1.4 >> > >> > [ 5.831150] net eth0: ALE Table size 1024 >> > >> > [ 5.838581] net eth0: phy found : id is : 0x7c0f1 >> > >> > [ 5.851838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready >> > >> > [ 9.896392] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx >> > >> > [ 9.904635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready >> > >> > chown: unrecognized option '--reference=/etc/resolv.conf' >> > >> > BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary. >> > >> > >> > >> > Usage: chown [-Rh]... USER[:[GRP]] FILE... >> > >> > chmod: unrecognized option '--reference=/etc/resolv.conf' >> > >> > BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary. >> > >> > >> > >> > Usage: chmod [-R] MODE[,MODE]... FILE... >> > >> > done. >> > >> > Starting system message bus: [ 14.887099] random: dbus-daemon: uninitialized urandom read (12 bytes read, 62 bits of entropy available) >> > >> > [ 14.912318] random: dbus-daemon: uninitialized urandom read (12 bytes read, 62 bits of entropy available) >> > >> > dbus. >> > >> > Starting OpenBSD Secure Shell server: sshd >> > >> > [ 15.393971] random: sshd: uninitialized urandom read (32 bytes read, 65 bits of entropy available) >> > >> > done. >> > >> > Starting Xserver >> > >> > Starting DHCP server: >> > >> > . >> > >> > starting DNS forwarder and DHCP server: dnsmasq... >> > >> > X.Org X Server 1.19.6 >> > >> > Release Date: 2017-12-20 >> > >> > X Protocol Version 11, Revision 0 >> > >> > Build Operating System: Linux 4.15.0-38-generic x86_64 >> > >> > Current Operating System: Linux polycaptil-machine-am335x-evmsk >> > 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l >> > >> > Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw >> > >> > Build Date: 05 November 2018 09:33:21PM >> > >> > >> > >> > Current version of pixman: 0.34.0 >> > >> > Before reporting problems, check http://wiki.x.org >> > >> > to make sure that you have the latest version. >> > >> > Markers: (--) probed, (**) from config file, (==) default setting, >> > >> > (++) from command line, (!!) notice, (II) informational, >> > >> > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. >> > >> > (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 2019 >> > >> > (==) Using config file: "/etc/X11/xorg.conf" >> > >> > (==) Using system config directory "/usr/share/X11/xorg.conf.d" >> > >> > done. >> > >> > Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf >> > >> > nl80211: 'nl80211' generic netlink not found >> > >> > Failed to initialize driver 'nl80211' >> > >> > wlan0: interface state UNINITIALIZED->DISABLED >> > >> > wlan0: AP-DISABLED >> > >> > hostapd_free_hapd_data: Interface wlan0 wasn't started >> > >> > Starting ntpd: done >> > >> > Starting syslogd/klogd: done >> > >> > Starting crond: OK >> > >> > >> > >> > Poky (Yocto Project Reference Distro) 2.5 >> > polycaptil-machine-am335x-evmsk /dev/ttyS0 >> > >> > >> > >> > polycaptil-machine-am335x-evmsk login: D-BUS per-session daemon >> > address is: >> > unix:abstract=/tmp/dbus-07WuJSySeb,guid=a3e41f2692316c19766e95535c54a7 >> > 25 >> > >> > Size 1024x768 not found in available modes >> > >> > Error: No calibratable devices found. >> > >> > matchbox: Cant find a keycode for keysym 269025056 >> > >> > matchbox: ignoring key shortcut XF86Calendar=!$contacts >> > >> > >> > >> > matchbox: Cant find a keycode for keysym 2809 >> > >> > matchbox: ignoring key shortcut telephone=!$dates >> > >> > >> > >> > matchbox: Cant find a keycode for keysym 269025050 >> > >> > matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop >> > >> > >> > >> > dbus-daemon[358]: Activating service name='org.a11y.atspi.Registry' >> > requested by ':1.0' (uid=0 pid=354 comm="matchbox-terminal ") >> > >> > dbus-daemon[358]: Successfully activated service 'org.a11y.atspi.Registry' >> > >> > SpiRegistry daemon is running with well-known name - >> > org.a11y.atspi.Registry >> > >> > [ 30.662697] random: nonblocking pool is initialized >> > >> > >> > >> > Poky (Yocto Project Reference Distro) 2.5 >> > polycaptil-machine-am335x-evmsk /dev/ttyS0 >> > >> > >> > >> > Thank’s to take time to read my message. >> > >> > N.Stanisavljevic >> > >> > -- >> > _______________________________________________ >> > yocto mailing list >> > yocto@yoctoproject.org >> > https://lists.yoctoproject.org/listinfo/yocto >>
-- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto