Probably, I'm learning ;-)
On Wed, 7 Nov 2018 at 12:59, Outback Dingo <outbackdi...@gmail.com> wrote:
> couldnt this have been a udev_append.bb
>
> instead of writing your own my-rules
> On Wed, Nov 7, 2018 at 6:46 PM Markus W <markus4...@gmail.com> wrote:
> >
> > This my bb file and than I have added the following to local.conf
> IMAGE_INSTALL_append = " my-rules ...".
> >
> > SUMMARY = "My rules"
> > LICENSE = "CLOSED"
> > PR = "r1"
> >
> > SRC_URI = "file://90-interfaces.rules"
> >
> > do_install[nostamp] = "1"
> > do_unpack[nostamp] = "1"
> >
> > do_install () {
> > install -d ${D}${sysconfdir}/udev/rules.d
> > install -m 0666 ${WORKDIR}/90-interfaces.rules
> ${D}/etc/udev/rules.d/90-interfaces.rules
> >
> > }
> >
> > FILES_${PN} += " /etc/udev/rules.d/90-interfaces.rules"
> >
> > PACKAGES = "${PN}"
> > PROVIDES = "my-rules"
> >
> > Hope this helps
> >
> > /Markus
> >
> > On Wed, 7 Nov 2018 at 12:41, Outback Dingo <outbackdi...@gmail.com>
> wrote:
> >>
> >> so curious, as im trying to add 2 udev rules also that i require in my
> >> build, so how was your recipe configured?
> >>
> >> mine keeps telling me i have a conflict between packages as they both
> >> install files to the same name and same place
> >> On Wed, Nov 7, 2018 at 4:53 PM Outback Dingo <outbackdi...@gmail.com>
> wrote:
> >> >
> >> >
> >> >
> >> > On Wed, Nov 7, 2018, 16:44 Markus W <markus4...@gmail.com wrote:
> >> >>
> >> >> I have resolved this issue. My problem was that in my layer I have a
> >> >> recipe-core and within that I had the following structure
> >> >> udev/udev-extra-rules and udev-extra-rules.bb file and a files dir
> on
> >> >> the same level.
> >> >>
> >> >> By renaming udev/udev-extra-rules to my-udev/my-udev-extra-rules it
> >> >> suddenly worked.
> >> >>
> >> >> Cool
> >> >>
> >> >>
> >> >> Regards,
> >> >> Markus
> >> >>
> >> >> On Tue, 6 Nov 2018 at 14:06, Outback Dingo <outbackdi...@gmail.com>
> wrote:
> >> >> >
> >> >> > On Tue, Nov 6, 2018 at 11:57 AM Markus W <markus4...@gmail.com>
> wrote:
> >> >> > >
> >> >> > > Hi!
> >> >> > >
> >> >> > > I want to append the rules in the
> >> >> > > recipe-core/udev/udev-rules-rpi/99-com.rules with the rules
> below from
> >> >> > > within my own recipe. I can´t figure out how to do that.
> >> >> > >
> >> >> > > I have tried to add those rules as separate rules file in a
> recipe in
> >> >> > > my own layer. After the build I can see that the rules file is
> in the
> >> >> > > correct directory /etc/udev/rules.d (next to 99-com.rules) but
> the
> >> >> > > rules didn't get applied. The groups below I have created by
> >> >> > > inheriting the useradd class (GROUPADD_PARAM_${PN} = "-r spi; -r
> i2c;
> >> >> > > -r gpio") in a different layer with a higher priority than the
> layer
> >> >> > > with the rules recipe.
> >> >> > >
> >> >> > > Not sure why this is not working. Any suggestions?
> >> >> > >
> >> >> > > 90-interfaces.rules file:
> >> >> > >
> >> >> > > SUBSYSTEM=="input", GROUP="input", MODE="0660"
> >> >> > > SUBSYSTEM=="i2c-dev", GROUP="i2c", MODE="0660"
> >> >> > > SUBSYSTEM=="spidev", GROUP="spi", MODE="0660"
> >> >> > > SUBSYSTEM=="bcm2835-gpiomem", GROUP="gpio", MODE="0660"
> >> >> > >
> >> >> > > SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660"
> >> >> > > SUBSYSTEM=="gpio*", PROGRAM="/bin/sh -c '\
> >> >> > > chown -R root:gpio /sys/class/gpio && chmod -R 770
> /sys/class/gpio;\
> >> >> > > chown -R root:gpio /sys/devices/virtual/gpio && chmod -R 770
> >> >> > > /sys/devices/virtual/gpio;\
> >> >> > > chown -R root:gpio /sys$devpath && chmod -R 770 /sys$devpath\
> >> >> > > '"
> >> >> > >
> >> >> >
> >> >> > might help to post the recipe used.....
> >> >> >
> >> >> >
> >> >> > > Regards,
> >> >> > > Markus
> >> >> > > --
> >> >> > > _______________________________________________
> >> >> > > yocto mailing list
> >> >> > > yocto@yoctoproject.org
> >> >> > > https://lists.yoctoproject.org/listinfo/yocto
>
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
