I suggest trying other reference image.
For example, core-image-minimal.
If it does not help, then core-image-full-cmdline.
Let's get the working reference first with one of these images.
--- Kosta Z.
________________________________
From: Zoran Stojsavljevic <zoran.stojsavlje...@gmail.com>
Sent: Wednesday, 17 October 2018 11:37:38
To: Kosta Zertsekel; Yocto Project
Subject: Re: [yocto] Sumo distro problem with dhcp packet?
Hello Kosta and others,
I am a bit behind on a schedule on this one. Albeit I followed the
advise, This does work for compiling and adding all these packages to
the ROOTFS. I see that after I added all them, I see the
initramfs.tar.xz expanded in
...poky/build/tmp/deploy/image/beagleboneblack/ directory.
But after I do the testing with initramfs, with all these packages
added. I do not find anything in the ROOTFS even what it should be
lookalike DHCP.
After trying # which dhclient, or # which dhcp-client, or # which
dhcp... It finds nothing!
Then, the next step was to find /etc/dhcp/ or similar. There is
nothing lookalike dhcp/ or dhcp* in /etc, which shows that these lines
in dhcp.inc recipe are not executed:
do_install_append () {
install -d ${D}${sysconfdir}/init.d
install -d ${D}${sysconfdir}/default
install -d ${D}${sysconfdir}/dhcp
install -m 0755 ${WORKDIR}/init-relay ${D}${sysconfdir}/init.d/dhcp-relay
install -m 0644 ${WORKDIR}/default-relay
${D}${sysconfdir}/default/dhcp-relay
install -m 0755 ${WORKDIR}/init-server
${D}${sysconfdir}/init.d/dhcp-server
install -m 0644 ${WORKDIR}/default-server
${D}${sysconfdir}/default/dhcp-server
rm -f ${D}${sysconfdir}/dhclient.conf*
rm -f ${D}${sysconfdir}/dhcpd.conf*
In addition, when I execute: $ bitbake -c cleanall dhcp, it says that
it executes thee tasks, and none of them are actually executed (0
executed).
I also recompiled form scratch the whole sumo BBB build, but this did
NOT solve the problem.
Any hint how I should proceed?
Thank you,
Zoran
_______
On Thu, Oct 11, 2018 at 1:40 PM Zoran Stojsavljevic
<zoran.stojsavlje...@gmail.com> wrote:
>
> Hello Kosta,
>
> > For example, you can do the below:
> > CORE_IMAGE_EXTRA_INSTALL_append = "openssh dhcp-client dhcp-server cmake...
> > "
>
> I added to this example dhcp-relay, just to test the whole build, and
> it does work. Actually, I need only dhcp-client for the target (since
> I have dhcp-server on the ETH interface on the opposite (VM) side).
>
> Thank you for the help!
> Zoran
> _______
> On Wed, Oct 10, 2018 at 5:57 PM Kosta Zertsekel
> <kzertse...@advaoptical.com> wrote:
> >
> > You need to take a look at the available dhcp packages
> > for dhcp recipe here:
> > https://git.yoctoproject.org/clean/cgit.cgi/poky/tree/meta/recipes-connectivity/dhcp/dhcp.inc#n100
> >
> > PACKAGES += "dhcp-libs dhcp-server dhcp-server-config dhcp-client
> > dhcp-relay dhcp-omshell"
> >
> > For example, you can do the below:
> > CORE_IMAGE_EXTRA_INSTALL_append = "openssh dhcp-client dhcp-server cmake...
> > "
> >
> > Thanks,
> > --- Kosta Z
> > ________________________________
> > From: yocto-boun...@yoctoproject.org <yocto-boun...@yoctoproject.org> on
> > behalf of Zoran Stojsavljevic <zoran.stojsavlje...@gmail.com>
> > Sent: Wednesday, 10 October 2018 16:29:05
> > To: Yocto Project
> > Subject: [yocto] Sumo distro problem with dhcp packet?
> >
> > Hello.
> >
> > I need on my test initramfs YOCTO image to add dhcp package (both dhcp
> > server and client).
> >
> > For the beginning, I traced it, where it is:
> > .../poky/meta/recipes-connectivity/dchp
> >
> > and decided to test it adding it to ...poky/build/conf/local.conf for the
> > starters:
> > CORE_IMAGE_EXTRA_INSTALL_append = "openssh dhcp cmake... "
> >
> > But it produced the following error:
> > [user@fedora28-ssd conf]$ bitbake -k core-image-base
> >
> > [snap]
> >
> > ERROR: Nothing RPROVIDES 'dhcp' (but
> > /home/user/projects2/beaglebone-black/sumo/poky/meta/recipes-core/images/core-image-base.bb
> > RDEPENDS on or otherwise requires it)
> > NOTE: Runtime target 'dhcp' is unbuildable, removing...
> > Missing or unbuildable dependency chain was: ['dhcp']
> > ERROR: Nothing RPROVIDES 'core-image-base'
> > No eligible RPROVIDERs exist for 'core-image-base'
> > NOTE: Runtime target 'core-image-base' is unbuildable, removing...
> > Missing or unbuildable dependency chain was: ['core-image-base']
> >
> > I added another package, dhcpcd, which is located in the another layer:
> > CORE_IMAGE_EXTRA_INSTALL_append = "openssh dhcpcd cmake... "
> >
> > so this one worked/was integrated seamlessly.
> >
> > What is the catch 22 here?
> >
> > Thank you,
> > Zoran
> >
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
