2017-12-18 12:11 GMT+01:00 Marek Słomiany <marekslomi...@gmail.com>: > Hi, I'm having problem while building Qt application inside of yocto and > using generated SDK. > I have bypassed it when using generated SDK, which I describe here. > > My setup in short: > I'm using for Qt this layer git://github.com/meta-qt5/meta-qt5.git in rocko > branch > beside Qt, other layers that might be important: > meta-poky (rocko) > meta-oe (morty) > meta-python (morty) > meta-networking (morty) > meta-ti (morty)
First of, why are you mixing branches here? You should use the same branch on all the layer for better chances for it to work out-of-the-box. There have been a lot of changes to the "core" from morty to rocko and trying to mix them probably raises some "extra" problems that you would not normally get. > > The platform is am335x > distro name is "etos" > > I had some problems with sdk (at first I added Qt to my build but > applications were developped and build by my coleagues using external > toolchains). > Recently I've added recipes for those apps to my layer. > To test if code I got from my team is building fine, I have generated SDK > using "bitbake <image-name> -c populate_sdk" and deployed it in default path > which is /opt/etos/1.0/. When I have sourced it and tried to configure I > got: What image did you build when you generated the SDK? meta-qt5 seems to provide a recipe for a toolchain containing all the Qt stuff including qmake [1]. Try that out if you haven't already by simply running: bitbake meta-toolchain-qt5 [1]. https://github.com/meta-qt5/meta-qt5/blob/master/recipes-qt/meta/meta-toolchain-qt5.bb -- Med Vänliga Hälsningar / Best Regards Mirza Krak -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
