On Wed, Nov 29, 2017 at 10:20 PM, <drew.mose...@northern.tech> wrote: > From: Drew Moseley <drew.mose...@northern.tech> > > Signed-off-by: Drew Moseley <drew.mose...@northern.tech> > --- > docs/extra-build-config.md | 6 ++++++ > recipes-bsp/bootfiles/rpi-config_git.bb | 6 ++++++ > 2 files changed, 12 insertions(+) > > diff --git a/docs/extra-build-config.md b/docs/extra-build-config.md > index 380d969..0390eee 100644 > --- a/docs/extra-build-config.md > +++ b/docs/extra-build-config.md > @@ -170,6 +170,12 @@ Screen LCD, HDMI interface > (<http://www.waveshare.com/7inch-HDMI-LCD-C.htm>) Rev > > WAVESHARE_1024X600_C_2_1 = "1" > > +If you would like to use the Raspberry Pi, 7 inch Capacitive Touch Screen > +LCD (https://www.raspberrypi.org/products/raspberry-pi-touch-display/), > please > +set the following in your local.conf: > + > + RASPBERRYPI_DISPLAY = "1" > + > ## Enable UART > > RaspberryPi 0, 1, 2 and CM will have UART console enabled by default. > diff --git a/recipes-bsp/bootfiles/rpi-config_git.bb > b/recipes-bsp/bootfiles/rpi-config_git.bb > index ca4160b..e9a4fe2 100644 > --- a/recipes-bsp/bootfiles/rpi-config_git.bb > +++ b/recipes-bsp/bootfiles/rpi-config_git.bb > @@ -127,6 +127,12 @@ do_deploy() { > echo "hdmi_cvt 1024 600 60 6 0 0 0" >> > ${DEPLOYDIR}/bcm2835-bootfiles/config.txt > echo "hdmi_drive=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt > fi > + > + # Raspberry Pi 7" Display/Touch screen > (https://www.raspberrypi.org/products/raspberry-pi-touch-display/) > + if [ "${RASPBERRYPI_DISPLAY}" = "1" ]; then > + echo "# Raspberry Pi 7\" display/touch screen" >> > ${DEPLOYDIR}/bcm2835-bootfiles/config.txt > + echo "lcd_rotate=2" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt > + fi > } > > do_deploy_append_raspberrypi3-64() {
This all looks good in general. Just a quick check though - are all users of this display going to want that lcd_rotate value? I've never used this display so not sure if that's specific to particular use cases or not. If you're happy that this is applicable for everyone could you submit this as a pull request on github (https://github.com/agherzan/meta-raspberrypi). Thanks, -- Paul Barker Togán Labs Ltd -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
