Hello, Thanks for the info. I tried to download the fido branch of the meta-swupdate layer, and executed bitbake -c menuconfig swupdate. I got the following error output (using Kontron SMARC sAMX6i machine config):
ERROR: Nothing PROVIDES 'u-boot-fw-utils' (but /home/andreas/yocto1.8/fsl-community-bsp/sources/meta-swupdate/recipes-suppo rt/swupdate/swupdate_git.bb DEPENDS on or otherwise requires it) ERROR: u-boot-fw-utils was skipped: Either UBOOT_MACHINE or UBOOT_CONFIG must be set in the smarc-samx6i machine configuration. ERROR: Required build target 'swupdate' has no buildable providers. Missing or unbuildable dependency chain was: ['swupdate', 'u-boot-fw-utils'] Seems to be some issue with building u-boot-fw-utils? //Andreas -----Original Message----- From: Stefano Babic [mailto:sba...@denx.de] Sent: 9. helmikuutata 2017 11:59 To: Andreas Enbacka <andreas.enba...@gasera.fi>; yocto@yoctoproject.org Subject: Re: [yocto] meta-swupdate layer with precompiled uboot Hi Andreas, On 09/02/2017 10:17, Andreas Enbacka wrote: > Hello, > > > > I am looking into using your custom meta-swupate with our current > Yocto > 1.8.1 (fido) based image. Please take a look - I know from ML that there is people still using fido and they pushed patches to this branch, but I merge new things just into -master, -morty and -krogoth. > However, as we are using Kontron SMARC sAMX6i for our platform, > Kontron supplies a pre-compiled uBoot. Is it possible to use > meta-swupdate > > to some extent without uBoot support, Yes - if you do not touch the environment, you can disable U-Boot support running "bitbake -c menuconfig swupdate" > or is it possible to get it to > work without compiling uBoot as well? It should work, if you disable U-Boot the libubootenv library should not be linked. > Any information would be greatly > appreciated. > > Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
