Hi. I have some questions and remarks and hopefully someone here can answer them.
The meta-raspberrpi layer is missing a morty release? Any time frame of when this will be added? There is currently a issue when using U-boot due to some updates in RPi boot firmware. See [1] and [2]. Which should be noted/resolved before a morty release? To provide some more information about above mentioned problem. If you use the current firmware files (20161030 in meta-raspberrypi) together with U-boot (2016.03) you lose the console on U-boot and on Linux kernel. This is due to the fact that "newer" firmware sets a default uart clock to 48 MHz, but U-boot has a hard-coded value of 3 MHz, and since we yet do not support to "forward" the patched DTB provided by the firmware from U-boot to Linux we also break console on Linux. The "default" values has been updated in Linux, see [2]. But if you use that updated Linux kernel there is a mismatch between u-boot and Linux. Should be noted that U-boot 2016.11 does not have this problem since it does not try to initialize the UART port at all and only relies on firmware to set it up correctly (see [3]). Hope I made sense here :). [1]. https://github.com/agherzan/meta-raspberrypi/issues/36 [2]. https://github.com/raspberrypi/linux/issues/1732#issuecomment-264810083 [3]. http://git.denx.de/?p=u-boot.git;a=commit;h=cd0fa5bff8052b19bde6967c2734f323c9848568 Best Regards Mirza -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
