On Sat, May 14, 2016 at 3:23 PM, Paul Knopf <pkn...@medxchange.com> wrote: > NVideo provides the following crosstools-ng config for building a > cross-compile toolchain. > > https://gist.github.com/anonymous/95b2ec71aebf8df644b1789bc3ed958d >
with OE it will build everything for you just clone https://github.com/kraj/meta-jetson-tk1 add it to bblayers.conf and then set MACHINE = "jetson-tk1" and bitbake core-image-minimal > Some parts I think that are relevant... > > --------- > CT_ARCH="arm" > CT_ARCH_SUPPORTS_BOTH_MMU=y > CT_ARCH_SUPPORTS_BOTH_ENDIAN=y > CT_ARCH_SUPPORTS_32=y > CT_ARCH_SUPPORTS_WITH_ARCH=y > CT_ARCH_SUPPORTS_WITH_CPU=y > CT_ARCH_SUPPORTS_WITH_TUNE=y > CT_ARCH_SUPPORTS_WITH_FLOAT=y > CT_ARCH_SUPPORTS_WITH_FPU=y > CT_ARCH_SUPPORTS_SOFTFP=y > CT_ARCH_DEFAULT_HAS_MMU=y > CT_ARCH_DEFAULT_LE=y > CT_ARCH_DEFAULT_32=y > CT_ARCH_ARCH="armv7-a" > CT_ARCH_CPU="cortex-a9" > CT_ARCH_TUNE="cortex-a9" > CT_ARCH_FPU="" > # CT_ARCH_BE is not set > CT_ARCH_LE=y > CT_ARCH_32=y > CT_ARCH_BITNESS=32 > CT_ARCH_FLOAT_HW=y > # CT_ARCH_FLOAT_SW is not set > CT_TARGET_CFLAGS="" > CT_TARGET_LDFLAGS="" > # CT_ARCH_alpha is not set > CT_ARCH_arm=y > # CT_ARCH_avr32 is not set > # CT_ARCH_blackfin is not set > # CT_ARCH_m68k is not set > # CT_ARCH_mips is not set > # CT_ARCH_powerpc is not set > # CT_ARCH_s390 is not set > # CT_ARCH_sh is not set > # CT_ARCH_sparc is not set > # CT_ARCH_x86 is not set > CT_ARCH_alpha_AVAILABLE=y > CT_ARCH_arm_AVAILABLE=y > CT_ARCH_avr32_AVAILABLE=y > CT_ARCH_blackfin_AVAILABLE=y > CT_ARCH_m68k_AVAILABLE=y > CT_ARCH_mips_AVAILABLE=y > CT_ARCH_powerpc_AVAILABLE=y > CT_ARCH_s390_AVAILABLE=y > CT_ARCH_sh_AVAILABLE=y > CT_ARCH_sparc_AVAILABLE=y > CT_ARCH_x86_AVAILABLE=y > --------- > > What files do I need to build with this cross-toolchain, inside of Yocto? > > > Thanks, > Paul Knopf > Software Engineer > Med X Change, Inc > pkn...@medxchange.com > > On Sat, May 14, 2016 at 6:14 PM, Paul Knopf <pkn...@medxchange.com> wrote: >> >> They are using "require conf/machine/include/tune-cortexa15.inc" for the >> TK1, but the TX1 uses a Cortex A57, not a A15. There is no "tune-cortexa57". >> >> Thanks, >> Paul Knopf >> Software Engineer >> Med X Change, Inc >> pkn...@medxchange.com >> >> On Sat, May 14, 2016 at 6:08 PM, Khem Raj <raj.k...@gmail.com> wrote: >>> >>> Look at kraj/meta-jetson-tk1 on github >>> >>> On May 14, 2016 2:17 PM, "Paul Knopf" <pkn...@medxchange.com> wrote: >>>> >>>> What configs do I need to include in my machine.conf to support this >>>> processor? >>>> >>>> http://www.nvidia.com/object/jetson-tx1-dev-kit.html >>>> >>>> "require conf/machine/include/arm/arch-*.inc" ? >>>> >>>> Thanks, >>>> Paul Knopf >>>> Software Engineer >>>> Med X Change, Inc >>>> pkn...@medxchange.com >>>> >>>> -- >>>> _______________________________________________ >>>> yocto mailing list >>>> yocto@yoctoproject.org >>>> https://lists.yoctoproject.org/listinfo/yocto >>>> >> > -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
