On 3/3/16 2:31 PM, Joe MacDonald wrote: > [Re: [yocto] [meta-selinux][PATCH] udev: Rename udev bbappend to eudev.] On > 16.03.02 (Wed 21:59) Philip Tricca wrote: > >> Not sure what to do with PR value in this case. > > Since it's a 'new' recipe, isn't this a case where we dump the PR > entirely?
Yup, all new stuff any reference to PR goes away, unless there is a specific reason to keep it. --Mark > -J. > >> >> Philip >> >> On 03/02/2016 09:55 PM, Philip Tricca wrote: >>> Required by switch to eudev in oe-core. >>> >>> Signed-off-by: Philip Tricca <fl...@twobit.us> >>> --- >>> recipes-core/eudev/eudev/init | 144 >>> ++++++++++++++++++++++++++++++++ >>> recipes-core/eudev/eudev/udev-cache | 32 +++++++ >>> recipes-core/eudev/eudev_3.1.5.bbappend | 5 ++ >>> recipes-core/udev/udev/init | 144 >>> -------------------------------- >>> recipes-core/udev/udev/udev-cache | 32 ------- >>> recipes-core/udev/udev_182.bbappend | 5 -- >>> 6 files changed, 181 insertions(+), 181 deletions(-) >>> create mode 100644 recipes-core/eudev/eudev/init >>> create mode 100644 recipes-core/eudev/eudev/udev-cache >>> create mode 100644 recipes-core/eudev/eudev_3.1.5.bbappend >>> delete mode 100644 recipes-core/udev/udev/init >>> delete mode 100644 recipes-core/udev/udev/udev-cache >>> delete mode 100644 recipes-core/udev/udev_182.bbappend >>> >>> diff --git a/recipes-core/eudev/eudev/init b/recipes-core/eudev/eudev/init >>> new file mode 100644 >>> index 0000000..bb8b95b >>> --- /dev/null >>> +++ b/recipes-core/eudev/eudev/init >>> @@ -0,0 +1,144 @@ >>> +#!/bin/sh >>> + >>> +### BEGIN INIT INFO >>> +# Provides: udev >>> +# Required-Start: mountvirtfs >>> +# Required-Stop: >>> +# Default-Start: S >>> +# Default-Stop: >>> +# Short-Description: Start udevd, populate /dev and load drivers. >>> +### END INIT INFO >>> + >>> +export TZ=/etc/localtime >>> + >>> +[ -d /sys/class ] || exit 1 >>> +[ -r /proc/mounts ] || exit 1 >>> +[ -x @UDEVD@ ] || exit 1 >>> +if [ "$use_udev_cache" != "" ]; then >>> + [ -f /etc/default/udev-cache ] && . /etc/default/udev-cache >>> +fi >>> +[ -f /etc/udev/udev.conf ] && . /etc/udev/udev.conf >>> +[ -f /etc/default/rcS ] && . /etc/default/rcS >>> + >>> +readfiles () { >>> + READDATA="" >>> + for filename in $@; do >>> + if [ -r $filename ]; then >>> + while read line; do >>> + READDATA="$READDATA$line" >>> + done < $filename >>> + fi >>> + done >>> +} >>> + >>> +kill_udevd () { >>> + pid=`pidof -x udevd` >>> + [ -n "$pid" ] && kill $pid >>> +} >>> + >>> +case "$1" in >>> + start) >>> + export ACTION=add >>> + # propagate /dev from /sys >>> + echo "Starting udev" >>> + >>> + # Check for requireed devtmpfs before trying to start udev and >>> + # mount a no-existant fs. >>> + if ! grep -q devtmpfs /proc/filesystems >>> + then >>> + echo "Missing devtmpfs, which is required for udev to run"; >>> + echo "Halting..." >>> + halt >>> + fi >>> + # mount the devtmpfs on /dev, if not already done >>> + LANG=C awk '$2 == "/dev" && ($3 == "devtmpfs") { exit 1 }' >>> /proc/mounts && { >>> + mount -n -o mode=0755 -t devtmpfs none "/dev" >>> + } >>> + [ -e /dev/pts ] || mkdir -m 0755 /dev/pts >>> + [ -e /dev/shm ] || mkdir -m 1777 /dev/shm >>> + # the automount rule for udev needs /tmp directory available, as /tmp >>> is a symlink >>> + # to /var/tmp which in turn is a symlink to /var/volatile/tmp, we need >>> to make sure >>> + # /var/volatile/tmp directory to be available. >>> + mkdir -p /var/volatile/tmp >>> + >>> + # restorecon /run early to allow mdadm creating dir /run/mdadm >>> + test ! -x /sbin/restorecon || /sbin/restorecon -F /run >>> + >>> + # Cache handling. >>> + # A list of files which are used as a criteria to judge whether the >>> udev cache could be reused. >>> + CMP_FILE_LIST="/proc/version /proc/cmdline /proc/devices /proc/atags" >>> + if [ "$use_udev_cache" != "" ]; then >>> + if [ "$DEVCACHE" != "" ]; then >>> + if [ -e $DEVCACHE ]; then >>> + readfiles $CMP_FILE_LIST >>> + NEWDATA="$READDATA" >>> + readfiles /etc/udev/cache.data >>> + OLDDATA="$READDATA" >>> + if [ "$OLDDATA" = "$NEWDATA" ]; then >>> + tar --directory=/ -xf $DEVCACHE > /dev/null >>> 2>&1 >>> + not_first_boot=1 >>> + [ "$VERBOSE" != "no" ] && echo "udev: using >>> cache file $DEVCACHE" >>> + [ -e /dev/shm/udev.cache ] && rm -f >>> /dev/shm/udev.cache >>> + else >>> + # Output detailed reason why the cached >>> /dev is not used >>> + if [ "$VERBOSE" != "no" ]; then >>> + echo "udev: udev cache not used" >>> + echo "udev: we use $CMP_FILE_LIST >>> as criteria to judge whether the cache /dev could be resued" >>> + echo "udev: olddata: $OLDDATA" >>> + echo "udev: newdata: $NEWDATA" >>> + fi >>> + echo "$NEWDATA" > /dev/shm/udev.cache >>> + fi >>> + /usr/sbin/setenforce 1 >>> + else >>> + if [ "$ROOTFS_READ_ONLY" != "yes" ]; then >>> + # If rootfs is not read-only, it's possible >>> that a new udev cache would be generated; >>> + # otherwise, we do not bother to read files. >>> + readfiles $CMP_FILE_LIST >>> + echo "$READDATA" > /dev/shm/udev.cache >>> + fi >>> + fi >>> + fi >>> + fi >>> + >>> + # make_extra_nodes >>> + kill_udevd > "/dev/null" 2>&1 >>> + >>> + # trigger the sorted events >>> + echo -e '\000\000\000\000' > /proc/sys/kernel/hotplug >>> + @UDEVD@ -d >>> + >>> + udevadm control --env=STARTUP=1 >>> + if [ "$not_first_boot" != "" ];then >>> + udevadm trigger --action=add --subsystem-nomatch=tty >>> --subsystem-nomatch=mem --subsystem-nomatch=vc >>> --subsystem-nomatch=vtconsole --subsystem-nomatch=misc >>> --subsystem-nomatch=dcon --subsystem-nomatch=pci_bus >>> --subsystem-nomatch=graphics --subsystem-nomatch=backlight >>> --subsystem-nomatch=video4linux --subsystem-nomatch=platform >>> + (udevadm settle --timeout=10; udevadm control --env=STARTUP=)& >>> + else >>> + udevadm trigger --action=add >>> + udevadm settle >>> + fi >>> + >>> + test ! -x /sbin/restorecon || /sbin/restorecon -F /dev /dev/shm >>> /dev/pts >>> + >>> + ;; >>> + stop) >>> + echo "Stopping udevd" >>> + start-stop-daemon --stop --name udevd --quiet >>> + ;; >>> + restart) >>> + $0 stop >>> + sleep 1 >>> + $0 start >>> + ;; >>> + status) >>> + pid=`pidof -x udevd` >>> + if [ -n "$pid" ]; then >>> + echo "udevd (pid $pid) is running ..." >>> + else >>> + echo "udevd is stopped" >>> + fi >>> + ;; >>> + *) >>> + echo "Usage: $0 {start|stop|status|restart}" >>> + exit 1 >>> +esac >>> +exit 0 >>> diff --git a/recipes-core/eudev/eudev/udev-cache >>> b/recipes-core/eudev/eudev/udev-cache >>> new file mode 100644 >>> index 0000000..6898577 >>> --- /dev/null >>> +++ b/recipes-core/eudev/eudev/udev-cache >>> @@ -0,0 +1,32 @@ >>> +#!/bin/sh -e >>> + >>> +### BEGIN INIT INFO >>> +# Provides: udev-cache >>> +# Required-Start: mountall >>> +# Required-Stop: >>> +# Default-Start: S >>> +# Default-Stop: >>> +# Short-Description: cache /dev to speedup the udev next boot >>> +### END INIT INFO >>> + >>> +export TZ=/etc/localtime >>> + >>> +[ -r /proc/mounts ] || exit 1 >>> +[ -x @UDEVD@ ] || exit 1 >>> +[ -d /sys/class ] || exit 1 >>> + >>> +[ -f /etc/default/rcS ] && . /etc/default/rcS >>> +[ -f /etc/default/udev-cache ] && . /etc/default/udev-cache >>> + >>> +if [ "$ROOTFS_READ_ONLY" = "yes" ]; then >>> + [ "$VERBOSE" != "no" ] && echo "udev-cache: read-only rootfs, skip >>> generating udev-cache" >>> + exit 0 >>> +fi >>> + >>> +if [ "$DEVCACHE" != "" -a -e /dev/shm/udev.cache ]; then >>> + echo "Populating dev cache" >>> + tar --directory=/ --selinux --xattrs -cf "$DEVCACHE" dev >>> + mv /dev/shm/udev.cache /etc/udev/cache.data >>> +fi >>> + >>> +exit 0 >>> diff --git a/recipes-core/eudev/eudev_3.1.5.bbappend >>> b/recipes-core/eudev/eudev_3.1.5.bbappend >>> new file mode 100644 >>> index 0000000..e87af0b >>> --- /dev/null >>> +++ b/recipes-core/eudev/eudev_3.1.5.bbappend >>> @@ -0,0 +1,5 @@ >>> +PR .= ".4" >>> + >>> +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" >>> + >>> +inherit enable-selinux >>> diff --git a/recipes-core/udev/udev/init b/recipes-core/udev/udev/init >>> deleted file mode 100644 >>> index bb8b95b..0000000 >>> --- a/recipes-core/udev/udev/init >>> +++ /dev/null >>> @@ -1,144 +0,0 @@ >>> -#!/bin/sh >>> - >>> -### BEGIN INIT INFO >>> -# Provides: udev >>> -# Required-Start: mountvirtfs >>> -# Required-Stop: >>> -# Default-Start: S >>> -# Default-Stop: >>> -# Short-Description: Start udevd, populate /dev and load drivers. >>> -### END INIT INFO >>> - >>> -export TZ=/etc/localtime >>> - >>> -[ -d /sys/class ] || exit 1 >>> -[ -r /proc/mounts ] || exit 1 >>> -[ -x @UDEVD@ ] || exit 1 >>> -if [ "$use_udev_cache" != "" ]; then >>> - [ -f /etc/default/udev-cache ] && . /etc/default/udev-cache >>> -fi >>> -[ -f /etc/udev/udev.conf ] && . /etc/udev/udev.conf >>> -[ -f /etc/default/rcS ] && . /etc/default/rcS >>> - >>> -readfiles () { >>> - READDATA="" >>> - for filename in $@; do >>> - if [ -r $filename ]; then >>> - while read line; do >>> - READDATA="$READDATA$line" >>> - done < $filename >>> - fi >>> - done >>> -} >>> - >>> -kill_udevd () { >>> - pid=`pidof -x udevd` >>> - [ -n "$pid" ] && kill $pid >>> -} >>> - >>> -case "$1" in >>> - start) >>> - export ACTION=add >>> - # propagate /dev from /sys >>> - echo "Starting udev" >>> - >>> - # Check for requireed devtmpfs before trying to start udev and >>> - # mount a no-existant fs. >>> - if ! grep -q devtmpfs /proc/filesystems >>> - then >>> - echo "Missing devtmpfs, which is required for udev to run"; >>> - echo "Halting..." >>> - halt >>> - fi >>> - # mount the devtmpfs on /dev, if not already done >>> - LANG=C awk '$2 == "/dev" && ($3 == "devtmpfs") { exit 1 }' >>> /proc/mounts && { >>> - mount -n -o mode=0755 -t devtmpfs none "/dev" >>> - } >>> - [ -e /dev/pts ] || mkdir -m 0755 /dev/pts >>> - [ -e /dev/shm ] || mkdir -m 1777 /dev/shm >>> - # the automount rule for udev needs /tmp directory available, as /tmp >>> is a symlink >>> - # to /var/tmp which in turn is a symlink to /var/volatile/tmp, we need >>> to make sure >>> - # /var/volatile/tmp directory to be available. >>> - mkdir -p /var/volatile/tmp >>> - >>> - # restorecon /run early to allow mdadm creating dir /run/mdadm >>> - test ! -x /sbin/restorecon || /sbin/restorecon -F /run >>> - >>> - # Cache handling. >>> - # A list of files which are used as a criteria to judge whether the >>> udev cache could be reused. >>> - CMP_FILE_LIST="/proc/version /proc/cmdline /proc/devices /proc/atags" >>> - if [ "$use_udev_cache" != "" ]; then >>> - if [ "$DEVCACHE" != "" ]; then >>> - if [ -e $DEVCACHE ]; then >>> - readfiles $CMP_FILE_LIST >>> - NEWDATA="$READDATA" >>> - readfiles /etc/udev/cache.data >>> - OLDDATA="$READDATA" >>> - if [ "$OLDDATA" = "$NEWDATA" ]; then >>> - tar --directory=/ -xf $DEVCACHE > /dev/null >>> 2>&1 >>> - not_first_boot=1 >>> - [ "$VERBOSE" != "no" ] && echo "udev: using >>> cache file $DEVCACHE" >>> - [ -e /dev/shm/udev.cache ] && rm -f >>> /dev/shm/udev.cache >>> - else >>> - # Output detailed reason why the cached >>> /dev is not used >>> - if [ "$VERBOSE" != "no" ]; then >>> - echo "udev: udev cache not used" >>> - echo "udev: we use $CMP_FILE_LIST >>> as criteria to judge whether the cache /dev could be resued" >>> - echo "udev: olddata: $OLDDATA" >>> - echo "udev: newdata: $NEWDATA" >>> - fi >>> - echo "$NEWDATA" > /dev/shm/udev.cache >>> - fi >>> - /usr/sbin/setenforce 1 >>> - else >>> - if [ "$ROOTFS_READ_ONLY" != "yes" ]; then >>> - # If rootfs is not read-only, it's possible >>> that a new udev cache would be generated; >>> - # otherwise, we do not bother to read files. >>> - readfiles $CMP_FILE_LIST >>> - echo "$READDATA" > /dev/shm/udev.cache >>> - fi >>> - fi >>> - fi >>> - fi >>> - >>> - # make_extra_nodes >>> - kill_udevd > "/dev/null" 2>&1 >>> - >>> - # trigger the sorted events >>> - echo -e '\000\000\000\000' > /proc/sys/kernel/hotplug >>> - @UDEVD@ -d >>> - >>> - udevadm control --env=STARTUP=1 >>> - if [ "$not_first_boot" != "" ];then >>> - udevadm trigger --action=add --subsystem-nomatch=tty >>> --subsystem-nomatch=mem --subsystem-nomatch=vc >>> --subsystem-nomatch=vtconsole --subsystem-nomatch=misc >>> --subsystem-nomatch=dcon --subsystem-nomatch=pci_bus >>> --subsystem-nomatch=graphics --subsystem-nomatch=backlight >>> --subsystem-nomatch=video4linux --subsystem-nomatch=platform >>> - (udevadm settle --timeout=10; udevadm control --env=STARTUP=)& >>> - else >>> - udevadm trigger --action=add >>> - udevadm settle >>> - fi >>> - >>> - test ! -x /sbin/restorecon || /sbin/restorecon -F /dev /dev/shm >>> /dev/pts >>> - >>> - ;; >>> - stop) >>> - echo "Stopping udevd" >>> - start-stop-daemon --stop --name udevd --quiet >>> - ;; >>> - restart) >>> - $0 stop >>> - sleep 1 >>> - $0 start >>> - ;; >>> - status) >>> - pid=`pidof -x udevd` >>> - if [ -n "$pid" ]; then >>> - echo "udevd (pid $pid) is running ..." >>> - else >>> - echo "udevd is stopped" >>> - fi >>> - ;; >>> - *) >>> - echo "Usage: $0 {start|stop|status|restart}" >>> - exit 1 >>> -esac >>> -exit 0 >>> diff --git a/recipes-core/udev/udev/udev-cache >>> b/recipes-core/udev/udev/udev-cache >>> deleted file mode 100644 >>> index 6898577..0000000 >>> --- a/recipes-core/udev/udev/udev-cache >>> +++ /dev/null >>> @@ -1,32 +0,0 @@ >>> -#!/bin/sh -e >>> - >>> -### BEGIN INIT INFO >>> -# Provides: udev-cache >>> -# Required-Start: mountall >>> -# Required-Stop: >>> -# Default-Start: S >>> -# Default-Stop: >>> -# Short-Description: cache /dev to speedup the udev next boot >>> -### END INIT INFO >>> - >>> -export TZ=/etc/localtime >>> - >>> -[ -r /proc/mounts ] || exit 1 >>> -[ -x @UDEVD@ ] || exit 1 >>> -[ -d /sys/class ] || exit 1 >>> - >>> -[ -f /etc/default/rcS ] && . /etc/default/rcS >>> -[ -f /etc/default/udev-cache ] && . /etc/default/udev-cache >>> - >>> -if [ "$ROOTFS_READ_ONLY" = "yes" ]; then >>> - [ "$VERBOSE" != "no" ] && echo "udev-cache: read-only rootfs, skip >>> generating udev-cache" >>> - exit 0 >>> -fi >>> - >>> -if [ "$DEVCACHE" != "" -a -e /dev/shm/udev.cache ]; then >>> - echo "Populating dev cache" >>> - tar --directory=/ --selinux --xattrs -cf "$DEVCACHE" dev >>> - mv /dev/shm/udev.cache /etc/udev/cache.data >>> -fi >>> - >>> -exit 0 >>> diff --git a/recipes-core/udev/udev_182.bbappend >>> b/recipes-core/udev/udev_182.bbappend >>> deleted file mode 100644 >>> index 6f8f049..0000000 >>> --- a/recipes-core/udev/udev_182.bbappend >>> +++ /dev/null >>> @@ -1,5 +0,0 @@ >>> -PR .= ".4" >>> - >>> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" >>> - >>> -inherit with-selinux >>> >> -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto