Hi,
I'm trying to flash Yocto Dizzy (core-image-minimal built with BitBake)
onto a LogicPD DM3730 / AM3730 Torpedo + Wireless SOM using the following
commands at the U-Boot prompt:
# nand erase.chip
# env default -f
# setenv loadaddr 0x81000000
# setenv ramdiskaddr 0x82000000
# setenv kernel_nand_offset 0x00280000
# setenv kernel_nand_size 0x00400000
# setenv ramdisk_nand_offset 0x00680000
# setenv ramdisk_nand_size 0x00dd8680
# setenv kernel_location nand
# setenv rootfs_location nand
# setenv rootfs_type ramdisk
# saveenv
# mmc init
# mw.l ${loadaddr} 0xFFFFFFFF 0x400000
# fatload mmc 0 ${loadaddr} mlo
# nandecc hw
# nand write ${loadaddr} 0x00000000 0x00020000
# nand write ${loadaddr} 0x00020000 0x00020000
# nand write ${loadaddr} 0x00040000 0x00020000
# nand write ${loadaddr} 0x00060000 0x00020000
# mw.l ${loadaddr} 0xFFFFFFFF 0x400000
# fatload mmc 0 ${loadaddr} u-boot.bin
# nandecc sw
# nand write.i ${loadaddr} 0x00080000 0x00080000
# mw.l ${loadaddr} 0xffffffff 0x400000
# fatload mmc 0 ${loadaddr} uImage
# nand write.i ${loadaddr} ${kernel_nand_offset} ${kernel_nand_size}
# mw.l ${loadaddr} 0xffffffff 0x400000
# fatload mmc 0 ${loadaddr} rootfs.ext2.gz.u-boot
# nand write.i ${loadaddr} ${ramdisk_nand_offset} ${ramdisk_nand_size}
The source files I'm using in my boot partition are the MLO, u-boot.bin,
rootfs.ext2.gz.u-boot, uImage, and u-boot.img. I am able to burn all the
necessary files onto the SOM, but when I complete the steps and power
cycle, I get:
U-Boot SPL 2012.07-dirty (Sep 30 2015 - 17:31:44)
Board: DM37xx Torpedo
Error: Bad compare! failed
Error: Bad compare! failed
Error: Bad compare! failed
...
mkimage signature not found - ih_magic = ea000014
...
Error: Bad compare! failed
Error: Bad compare! failed
...
I've done a good amount of research online and some people say that it's an
issue with the nandecc setting, but my only options in U-Boot are hw
(hardware) and sw (software) ecc algorithms. Just curious if anyone could
identify my errors or possibly point me in the direction of good
documentation?
Thanks!
Alex
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
