On Fri, 2015-05-15 at 11:33 +0000, Raghavendra Kakarla wrote: > Hi Todor, > > It is an autotool based example. > It is not generated makefile itself. >
Is it an example you created yourself or is it the autotools C Hello World template provided by the Yocto Eclipse Plug-in. > I attached the makefile.in and makefile.am file to the paste bin. Could you please paste the Makefile and share the pastebin link? > Thanks, > > Raghavendra. > > > ________________________________________ > From: Minchev, Todor <todor.minc...@intel.com> > Sent: Friday, May 15, 2015 4:41 PM > To: Raghavendra Kakarla > Cc: yocto@yoctoproject.org > Subject: Re: [yocto] Issue with yocto ADT > > Hello Raghavendra, > > Could you please pastebin the makefile from your project? > > http://pastebin.com/ > > Cheers, > Todor > > On Fri, 2015-05-15 at 10:47 +0000, Raghavendra Kakarla wrote: > > Hi Todor, > > > > Thank you for your reply. > > > > By default we have the setting like this only. > > > > But we got the error. > > > > Thanks, > > Raghavendra. > > ________________________________________ > > From: Minchev, Todor <todor.minc...@intel.com> > > Sent: Friday, May 15, 2015 4:05 PM > > To: Raghavendra Kakarla > > Cc: yocto@yoctoproject.org > > Subject: Re: [yocto] Issue with yocto ADT > > > > Hello Raghavendra, > > > > Please try the following: > > > > Right click on your project - Properties - C/C++ Build - Select the > > 'Behavior' tab - untick 'Build on resource save' and remove 'all' from > > the 'Build' field > > > > Cheers, > > Todor > > > > On Fri, 2015-05-15 at 09:32 +0000, Raghavendra Kakarla wrote: > > > Hi All, > > > > > > > > > I have problem with the ADT while i am building the autotool example > > > helloword project which is given in the "yocto ADT autotool project". > > > > > > > > > Could you please help me in resolving this issue. > > > > > > > > > I followed the following steps for installing the adt in my > > > development PC: > > > > > > > > > > > > I built the toolchain using the following command: > > > > > > $cd ~/poky > > > $source ./oe-init-build-env > > > $bitbake meta-ide-support > > > > > > > > > Extract the root file system by using the following commands: > > > > > > $cd ~ > > > $source ~/poky/build/tmp/environment-setup-mips32r2el-poky-linux > > > $runqemu-extract-sdk \ > > > ~/poky/build/tmp/deploy/images/arqlyn/ > > > core-image-minimal-dhruwa_ioe-20150511102759.rootfs.tar.bz2\ > > > $HOME/arqlyn > > > > > > I followed the command given in the yocto project dev-manual for > > > installing eclipse and adding yocto plugin to eclipse. > > > > > > I Gave the following data to the eclipse for configuring the > > > cross-compiler options: > > > > > > 1. I select the "Build System Derived Toolchain" > > > 2.point the toolchain path to "home/testuser/poky/build" > > > 3.gave sysroot path to /home/testuser/arqlyn > > > > > > After entered this information I got the my machine-name in the > > > "select the target architecture" filed. > > > > > > After this I create a autotool support project and tried to build but > > > it gives the error. > > > > > > Regards, > > > > > > Raghavendra. > > > > > > > > > > > > -- > > > _______________________________________________ > > > yocto mailing list > > > yocto@yoctoproject.org > > > https://lists.yoctoproject.org/listinfo/yocto > > >
smime.p7s
Description: S/MIME cryptographic signature
-- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
