From: Wenzong Fan <wenzong....@windriver.com>
This config file was created by postinstall or initscript, the correct
label should be "etc_t", run restorecon /etc/iscsi/initiatorname.iscsi
to fix it and remove below avc denied issues:
avc: denied { read } for pid=6094 comm="iscsid" \
name="initiatorname.iscsi" dev="sda3" ino=1057846 \
scontext=system_u:system_r:iscsid_t:s0-s15:c0.c1023 \
tcontext=system_u:object_r:etc_runtime_t:s0 tclass=file
Signed-off-by: Wenzong Fan <wenzong....@windriver.com>
---
.../iscsi-initiator-utils/files/initd.debian | 123 +++++++++++++++++++++
.../iscsi-initiator-utils_%.bbappend | 1 +
2 files changed, 124 insertions(+)
create mode 100644
networking-layer/recipes-daemons/iscsi-initiator-utils/files/initd.debian
create mode 100644
networking-layer/recipes-daemons/iscsi-initiator-utils/iscsi-initiator-utils_%.bbappend
diff --git
a/networking-layer/recipes-daemons/iscsi-initiator-utils/files/initd.debian
b/networking-layer/recipes-daemons/iscsi-initiator-utils/files/initd.debian
new file mode 100644
index 0000000..43fb348
--- /dev/null
+++ b/networking-layer/recipes-daemons/iscsi-initiator-utils/files/initd.debian
@@ -0,0 +1,123 @@
+#! /bin/sh
+### BEGIN INIT INFO
+# Provides:
+# Required-Start:
+# Required-Stop:
+# Default-Start:
+# Default-Stop:
+# Short-Description: Starts and stops the iSCSI initiator services and logins
to default targets
+### END INIT INFO
+#set -x
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+DAEMON=/usr/sbin/iscsid
+ADM=/usr/sbin/iscsiadm
+PIDFILE=/var/run/iscsid.pid
+
+[ -x "$DAEMON" ] || exit 0
+
+if [ ! -d /sys/class/ ]; then
+ echo "Failure:" "iSCSI requires a mounted sysfs, not started."
+ exit 1
+fi
+
+nodestartup_re='s/^node\.conn\[0]\.startup[ ]*=[ ]*//p'
+
+RETVAL=0
+
+start() {
+ echo "Starting iSCSI initiator service" "iscsid"
+ modprobe -q iscsi_tcp 2>/dev/null || :
+ modprobe -q ib_iser 2>/dev/null || :
+ if [ ! -f /etc/iscsi/initiatorname.iscsi ]; then
+ INITIATORNAME=$(iscsi-iname)
+ cat >/etc/iscsi/initiatorname.iscsi <<EOF
+## DO NOT EDIT OR REMOVE THIS FILE!
+## If you remove this file, the iSCSI daemon will not start.
+## If you change the InitiatorName, existing access control lists
+## may reject this initiator. The InitiatorName must be unique
+## for each iSCSI initiator. Do NOT duplicate iSCSI InitiatorNames.
+InitiatorName=$INITIATORNAME
+EOF
+ fi
+
+ # Fix label for /etc/iscsi/initiatorname.iscsi if SELinux was enabled
+ test ! -x /sbin/restorecon || /sbin/restorecon -F
/etc/iscsi/initiatorname.iscsi
+
+ start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON
+ RETVAL=$?
+ starttargets
+}
+
+starttargets() {
+ echo "Setting up iSCSI targets"
+ $ADM -m node --loginall=automatic
+}
+
+stoptargets() {
+ echo "Disconnecting iSCSI targets"
+ sync
+ $ADM -m node --logoutall=all
+ RETVAL=$?
+ #if RETVAL is 21, means no active sessions, consider ok
+ if [ "$RETVAL" = "21" ]; then
+ RETVAL=0
+ fi
+}
+
+stop() {
+ stoptargets
+ if [ $RETVAL -ne 0 ]; then
+ echo "Failure:" "Could not stop all targets, try again later"
+ return $RETVAL
+ fi
+
+ echo "Stopping iSCSI initiator service"
+ start-stop-daemon --stop --quiet --pidfile $PIDFILE --exec $DAEMON
+ rm -f $PIDFILE
+ status=0
+ modprobe -r ib_iser 2>/dev/null
+ if [ "$?" -ne "0" -a "$?" -ne "1" ]; then
+ status=1
+ fi
+ modprobe -r iscsi_tcp 2>/dev/null
+ if [ "$?" -ne "0" -a "$?" -ne "1" ]; then
+ status=1
+ fi
+}
+
+restart() {
+ stop
+ if [ $RETVAL -ne 0 ]; then
+ echo "Failure:" "Stopping iSCSI initiator service failed, not
starting"
+ return $RETVAL
+ fi
+ start
+}
+
+restarttargets() {
+ stoptargets
+ if [ $RETVAL -ne 0 ]; then
+ echo "Failure:" "Could not stop all targets, try again later"
+ return $RETVAL
+ fi
+ starttargets
+}
+
+status() {
+ #XXX FIXME: what to do here?
+ #status iscsid
+ # list active sessions
+ echo Current active iSCSI sessions:
+ $ADM -m session
+}
+
+case "$1" in
+ start|starttargets|stop|stoptargets|restart|restarttargets|status)
+ $1
+ ;;
+ *)
+ echo "Usage: $0 {start|stop|restart|status}"
+ exit 1
+ ;;
+esac
+exit $RETVAL
diff --git
a/networking-layer/recipes-daemons/iscsi-initiator-utils/iscsi-initiator-utils_%.bbappend
b/networking-layer/recipes-daemons/iscsi-initiator-utils/iscsi-initiator-utils_%.bbappend
new file mode 100644
index 0000000..81fe7b7
--- /dev/null
+++
b/networking-layer/recipes-daemons/iscsi-initiator-utils/iscsi-initiator-utils_%.bbappend
@@ -0,0 +1 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
--
1.9.1
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
