Hi Bruce,
On 3 Jan 2015, at 00:08, Bruce Ashfield <bruce.ashfi...@gmail.com> wrote:
> On Fri, Jan 2, 2015 at 9:52 AM, Chris Tapp <opensou...@keylevel.com> wrote:
>> I thought I knew how to do this, but... ;-)
>>
>> I'm trying to add configuration items to the valleyisland BSP. I've got the
>> following bbappend:
>>
>> File: linux-yocto_3.10.bbappend
>> -------
>> FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
>>
>> SRC_URI += " file://enable-hid-apple.cfg"
>> SRC_URI += " file://enable-R8169.cfg"
>>
>> However, these .cfg fragments aren't even getting pulled into the build area.
>>
>> Adding a reference to a non-existent file is ignored when I would have
>> expected to see a fetch error
>>
>> SRC_URI += "file://fsdfsdfdsfsd"
>>
>> What else do I need to do to get my .cfg files pulled in?
>
> What release / branch is this with ? What you have above is all that you need
> to do. I'm not near my development machine, but will be on Monday and can
> confirm that something hasn't been broken.
This is with 'daisy'.
> In the meantime, have you dumped the environment to confirm that that your
> values really are on the SRC_URI and that something else in the layers
> isn't coming along later and clobbering the SRC_URI (unlikely, but worth
> ruling
> out).
Ah - that shows:
# $SRC_URI [8 operations]
# set /media/SSD-RAID/poky-git/meta/conf/bitbake.conf:588
# ""
# set /media/SSD-RAID/poky-git/meta/conf/documentation.conf:378
# [doc] "The list of source files - local or remote. This variable tells
the OpenEmbedded build system what bits to pull in for the build and how to
pull them in."
# set
/media/SSD-RAID/poky-git/meta/recipes-kernel/linux/linux-yocto_3.10.bb:23
#
"git://git.yoctoproject.org/linux-yocto-3.10.git;bareclone=1;branch=${KBRANCH},${KMETA};name=machine,meta"
# append
/media/SSD-RAID/meta-keylevel-sjs/project-specific-layers/opty4-valleyisland/recipes-kernel/linux/linux-yocto_3.10.bbappend:4
# " file://enable-R8169.cfg"
# append
/media/SSD-RAID/meta-keylevel-sjs/project-specific-layers/opty4-valleyisland/recipes-kernel/linux/linux-yocto_3.10.bbappend:5
# "file://fsdfsdfdsfsd"
# finalize ast.py:323 [finalize]
# "was:
git://git.yoctoproject.org/linux-yocto-3.10.git;bareclone=1;branch=${KBRANCH},${KMETA};name=machine,meta
file://enable-R8169.cfg file://fsdfsdfdsfsd"
# override[valleyisland-64]:set
/media/SSD-RAID/meta-intel-git-2/meta-isg/meta-valleyisland/recipes-kernel/linux/linux-yocto_3.10.bbappend:33
#
"git://git.yoctoproject.org/linux-yocto-3.10.git;protocol=git;nocheckout=1;branch=${KBRANCH},${KMETA},valleyisland-io-3.0;name=machine,meta,valleyisland-io"
# finalize override[valleyisland-64]:
#
"git://git.yoctoproject.org/linux-yocto-3.10.git;protocol=git;nocheckout=1;branch=${KBRANCH},${KMETA},valleyisland-io-3.0;name=machine,meta,valleyisland-io"
# computed:
#
"git://git.yoctoproject.org/linux-yocto-3.10.git;protocol=git;nocheckout=1;branch=${KBRANCH},${KMETA},valleyisland-io-3.0;name=machine,meta,valleyisland-io"
SRC_URI="git://git.yoctoproject.org/linux-yocto-3.10.git;protocol=git;nocheckout=1;branch=standard/base,meta,valleyisland-io-3.0;name=machine,meta,valleyisland-io"
If I change my bbappend to use lines of the form:
SRC_URI_valleyisland-64 += " file://enable-R8169.cfg"
then the fragments make it in to the configuration.
I've never really understood machine overrides that well - I thought that using
a plain SRC_URI would apply regardless, but that's obviously not the case ;-)
Thanks for the pointer :-)
--
Chris Tapp
opensou...@keylevel.com
www.keylevel.com
----
You can tell you're getting older when your car insurance gets real cheap!
--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
