On 04/08/2014 08:52, Kévin THIERRY wrote: > > On 02/08/2014 17:35, Alex J Lennon wrote: >> On 01/08/2014 17:36, Alex J Lennon wrote: >>> On 01/08/2014 16:38, Alex J Lennon wrote: >>>>> I don't know either but I think it's best to be compliant with both >>>>> bash and dash, I will try to correct those issues in order to be >>>>> dash-compliant. Thanks a lot for the feedback ;) >>>> No problem Kévin. I'm glad you feel it is of some use. I'm getting >>>> other >>>> recipes failing now with bash. What I'll probably do is let it run to >>>> completion with bitbake -k and collate the failures. >>>> >>>> Hopefully that'll be some useful feedback in terms of a build on >>>> Ubuntu >>>> >>>> Cheers, >>>> >>>> Alex >>>> >> Kévin, >> >> I made some progress with a USB installation of Yocto Tizen and a >> VirtualBox disk. > That's good news ! Did you have to make some changes in meta-tizen ? > If so, could you send us your patches so we can integrate them ? Thanks ! >> >> Both a Samsung laptop running from USB and a VirtualBox machine boot, >> but after mounting the root filesystem they go extremely slowly. >> >> They get to "failed to get machine ID" and then it's taking a minute >> or two before new output appears. Then screen goes black and I don't >> appear to get any further. >> >> e.g. >> https://www.dropbox.com/sc/ckc84doykfnyvwp/AAAA7s_wocGh1PNUJ3tfIMBLa?n=17361870 >> >> > We already encountered this issue in the past unfortunately we don't > know what causes that. We didn't get this issue recently so we are > unable to reproduce it. I'm wondering if it could be linked too the > use of a USB (we are not using USB anymore to test the images since > it's not very convenient). I will put an image on a USB stick and see > how it goes. > > If you have more ideas about what could cause this issue we would be > glad to know them. > > Kevin
I don't think it's specifically due to USB as I was using USB for the laptop test, but I built up a VDI disk image in a VirtualBox for the VM test, so no USB there... I'm not sure why it might be I'm afraid Kevin. I started trying to follow the manual procedure to build but ran into some build errors there and ran out of time. Cheers, Alex -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
