Hi John, On 8 May 2014, at 16:25, r10kindsofpeople <r10kindsofpeo...@gmail.com> wrote:
> I'm trying to experiment with the SATO build on a DN2800MT with a VGA > monitor, but can't seem to get going. The binaries from Daisy and genericX86 > get as far as the Yocto progress bar complete, and then go black. Any quick > hints? Have a look in the README file for the cedartrail BSP. At the bottom you will find: Work Around for VGA and LVDS Display issue in PVR driver -------------------------------------------------------- The PVR driver has a issue that for some systems it causes it to incorrectly assume that a LVDS display is connected while infact a VGA display is connected and Vice Versa. If your VGA or LVDS display does not work with "cedartrail" MACHINE, then if you have connected a VGA display, add the following to the kernel command line: video=LVDS-1:d video=VGA-1:e <snip> I suspect it's this. Watch out if you use HDMI as well - the VGA fix seems to break HDMI. On my systems the VGA then works, but the HDMI pauses a lot running the same image! I think you can use similar magic for HDMI (or did I just take it out?). > I note also that genericX86 looks like a complete Yocto tree rather than just > BSP layers. Am I right, and are there hints on how to combine this with a > generic Daisy tree for other processors/projects? > > Yocto_11_0_0/genericx86-daisy-11.0.0/meta-yocto-bsp/recipes-graphics/xorg-xserver/xserver-xf86-config/genericx86/xorg.conf > is a zero length file. ? > > John > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto Chris Tapp opensou...@keylevel.com www.keylevel.com -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
