> -----Original Message----- > From: Zhang, Jessica [mailto:jessica.zh...@intel.com] > Sent: Thursday, August 15, 2013 4:55 PM > To: Bryan Evenson; yocto@yoctoproject.org > Subject: RE: [yocto] Error building meta-ide-support; > 'SNDCTL_DSP_MAPINBUF' undeclared here > > Hi Bryan, > > When you tried to setup your eclipse plugin, what is your toolchain and > what > is your sysroot. Are they built by you or you download them? >
I built my own. I'm using the meta-atmel layer located at https://github.com/evensonbryan/meta-atmel.git, using the instructions shown in the README to download and build. Only exception is that I have MACHINE set as "at91sam9x5ek" in local.conf. I did "bitbake core-image-minimal" as the initial build to start off everything; never tried to bitbake meta-ide-support on this system. -Bryan > - Jessica > > -----Original Message----- > From: yocto-boun...@yoctoproject.org [mailto:yocto- > boun...@yoctoproject.org] > On Behalf Of Bryan Evenson > Sent: Tuesday, August 13, 2013 9:25 AM > To: yocto@yoctoproject.org > Subject: [yocto] Error building meta-ide-support; 'SNDCTL_DSP_MAPINBUF' > undeclared here > > I am working on installing and setting up the Eclipse IDE plug-in for > Eclipse Juno. I am using poky/dylan (at the yocto-1.4.1 tag) for my > build > environment. I am to the "Configuring the Cross-Compiler Options" > section > from the current Yocto Project mega-manual, and after setting up the > Toolchain Root Location and the Sysroot Location, I get the error > 'Specified > toolchain directory does not contain a toolchain generated with > "bitbake > meta-ide-support"'. So, I went back and did "bitbake meta-ide-support" > as > requested and I am getting the following errors: > > DEBUG: Executing shell function do_compile > NOTE: make -j 2 > CC arm-linux-user/linux-user/syscall.o > In file included from > /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0- > r0/qemu-1. > 4.0/linux-user/syscall.c:3705:0: > /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0- > r0/qemu-1. > 4.0/linux-user/ioctls.h:189:1: error: 'SNDCTL_DSP_MAPINBUF' undeclared > here > (not in a function) > /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0- > r0/qemu-1. > 4.0/linux-user/ioctls.h:190:1: error: 'SNDCTL_DSP_MAPOUTBUF' undeclared > here > (not in a function) > /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0- > r0/qemu-1. > 4.0/linux-user/ioctls.h:245:1: error: 'SOUND_MIXER_ACCESS' undeclared > here > (not in a function) > make[1]: *** [linux-user/syscall.o] Error 1 > make: *** [subdir-arm-linux-user] Error 2 > make: *** Waiting for unfinished jobs.... > ERROR: oe_runmake failed > ERROR: Function failed: do_compile (see > /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0- > r0/temp/lo > g.do_compile.20276 for further information) > > I did a search and I cannot find these defines anywhere in the i686 > sysroot > directory, but it exists in my target's sysroot directory. Is there > something wrong with the i686 sysroot setup on my system? If it > matters, > I'm doing the build machine is running Ubuntu 12.04.2 LTS. > > Thanks, > Bryan > > > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
