Some one have any suggestion? I think that is a meta-ti configuration.
I did the same for imx53 using meta-fsl and the mouse and keyboard working fine! Thanks 2013/1/19 Raul Rosetto Munoz <munoz0r...@gmail.com> > Hello All, > > I compiled a core-image-sato for a BeagleBone and BeagleBoard. > > I'm using all layers at danny version. > > My bblayer is like this: > > > BBLAYERS ?= " \ > /home/prjs/video0001/linux/poky/meta \ > /home/prjs/video0001/linux/poky/meta-yocto \ > /home/prjs/video0001/linux/meta-ti \ > /home/prjs/video0001/linux/meta-openembedded/meta-oe \ > " > > In beagleboard Im using the DVI conector to see the X, and for beaglebone > I'm using a DVI cape. > > At the two cases the video working very well but for this two situation, > when I plug some USB keyboard or USB mouse, I see at serial console that > linux recognize the device, but in video interface, nothing happen. > > I dont know if is necessary create a video target for the USB devices. > > Here is a USB mouse log example: > > > [ 74.651458] usb 1-1: USB disconnect, device number 2 > [ 79.874298] usb 1-1: new low-speed USB device number 3 using musb-hdrc > [ 80.016906] usb 1-1: New USB device found, idVendor=15d9, idProduct=0a33 > [ 80.023925] usb 1-1: New USB device strings: Mfr=0, Product=1, > SerialNumber=0 > [ 80.031402] usb 1-1: Product: USB Mouse > [ 80.041412] input: USB Mouse as > /devices/platform/omap/musb-ti81xx/musb-hdrc.1/usb1/1-1/1-1:1.0/input/input1 > [ 80.052642] generic-usb 0003:15D9:0A33.0002: input: USB HID v1.10 Mouse > [USB Mouse] on usb-musb-hdrc.1-1/input0 > > > Thanks > > -- > *Raul Rosetto Muñoz* > -- *Raul Rosetto Muñoz*
_______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto